- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
What do you do when your airbag light comes on?
The best thing to do if your airbag light has come on is to
take the vehicle to a mechanic right away
. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.
Will disconnecting battery reset airbag light?
Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. …
Remove the terminal clamp and leave it disconnected for 5-10 seconds
to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
Where do you reset the airbag light?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
What does it mean when the airbag light stays on?
The airbag light indicates
that something is wrong with the seatbelts or airbags
. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on
. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
Is it illegal to drive with airbag light on?
Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your
safety system isn’t working at 100%
and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
How much does it cost to fix the airbag light?
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be
up to about $600
.
How do I know if my airbag sensor is bad?
You can easily tell if the sensor is functioning
if the airbag warning light on the dashboard is illuminating every time you start the vehicle
. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
How do you reset the SRS airbag light?
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
How do you reset an airbag sensor?
Remove the terminal clamp and leave it disconnected for 5-10 seconds
to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off. If it comes back on then the best thing to do is to take your car in for a diagnostics scan.
Is there a fuse for the airbag?
The airbags won’t be activated by the fuse
. The whole system on most cars is inoperative if the service air bag light is on.
What does the airbag light look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with
a large circle (the airbag) in front of the person
. It will normally light up briefly each time you start your vehicle, and then go off.
Where is the fuse for SRS light?
The fuse block is
on the driver’s side of the engine compartment
. Pull out the SRS fuse. In most models, this is fuse #40, located in the lower right corner of the fuse block.
Can you sell a car with the airbag light on?
You can sell it
, but if someone asks about the airbag light, you should tell them what you know about it.
How do you check airbag codes?
The airbag codes are double digit numbers. To read the codes,
count the number of times the light flashes, wait for the pause and count the flashes again
. For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.
