How Do I Get The TV Guide To My Comcast Remote?

To access the guide grid,

press the Guide button on the remote control

. To view program information, use the arrow buttons to highlight the program on the grid. Program information displays at the bottom of the screen. Use the up arrow to dismiss the additional program information.

How do you reset the channel guide on Comcast?

1. Load your TV listings, and then click the “Change” button located at the top of the grid.
2. Enter your ZIP code in the provided field.
3. Click the “Time Zones” drop-down menu and select your time zone.
4. Click the “Save” button to refresh your TV listings.

Why is the guide not working on my Xfinity remote?

If the problem persists,

unplug your receiver and wait 15 seconds

. Plug the power back in and wait 30 minutes before trying Guide or Menu again. If your receiver is still having problems displaying your menus or guide, contact our Technical Support team.

How do I make my Xfinity guide full screen?

1. Press the xfinity button on your remote.
2. Use the left arrow or right arrow button to highlight Settings (the gear icon). …
3. Use the down arrow button to highlight Device Settings. …
4. Use the down arrow button to highlight Video Display. …
5. Highlight Video Output Resolution.

Why is my Comcast guide not working?

If the problem persists,

unplug your receiver and wait 15 seconds

. Plug the power back in and wait 30 minutes before trying Guide or Menu again. If your receiver is still having problems displaying your menus or guide, contact our Technical Support team.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means

low batteries

. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

What is the Setup button on my Xfinity Remote?

On your remote,

press and hold the Setup button

. If you don’t have a setup button you can press and hold the Xfinity and Info(i) buttons together. The LED at the top of the remote will change from red to green.

How do I reset my TV Guide?

1. Go to TV Guide.
2. Go up to the navigation bar.
3. Arrow to the right, until you highlight the Setup tab.
4. Arrow down once to highlight “Change System Setting”. Do not hit enter.
5. Enter code 653274147. You will not see anything happen until the end.

Why is the guide on my TV not working?

If the problem persists,

unplug your receiver and wait 15 seconds

. Plug the power back in and wait 30 minutes before trying Guide or Menu again. If your receiver is still having problems displaying your menus or guide, contact our Technical Support team.

Where is the reset button on Xfinity cable box?

Restart

Using the Power Button

Press and hold the Power button located on the front of the TV Box for 10 seconds. The TV Box should automatically restart.

Why is my xfinity not full screen?

If this is happening on more than one channel, try checking that the correct input (

HDMI

) is being used on the TV and that the user settings are correct on the TV Box. If this issue is only happening with one channel, adjust the aspect ratio using your remote or TV menu settings.

Why is my TV not showing the full screen?

If the picture doesn’t fill the screen, it’s

showing 4:3 standard-def programming at its native resolution

. … Again, all TVs are different, but look for the aspect ratio adjustments in your picture settings. Make sure it’s set to “Auto-Adjust” or “Normal” instead of “Stretch,” “Full Screen,” or “Zoom.”

How do I get the picture on my TV to fit the screen?

1. Press MENU on your remote control.
2. Use the down arrow button to highlight Settings, press OK.
3. Use the down arrow button to highlight Television, press OK.
4. Select TV resolution, press OK.
5. Use the arrow buttons to select HD 720p, or HD 1080i or HD 1080p.
6. Press OK.

How do you pair a remote to a TV?

Connecting a remote to a TV requires a clear path so the TV can receive the signal the remote lets out during the programing process. Universal remotes use 3-digit codes to sync to different TVs, but not all the codes listed will work. You must complete a process using different codes if the first try doesn’t work.

How do I fix the remote sensor on my TV?

Switch off the TV, switch off the power outlet and unplug the TV from the outlet. Press and hold the power button on the TV for 30 seconds and then release. Reconnect the power cable to the TV, switch on the power outlet and then switch on the TV. Test if the remote control now works correctly.

How do I get my remote to work on my TV?

1. i. Hold down the program button on the remote control for 3 seconds. …
2. i. Press the “TV” button on the remote control to let the remote know it will be syncing with a TV. …
3. i. Find the proper codes for the TV you are programing.