How Do I Program My ILive Soundbar To My Dish Remote?

1. Press and hold down the AUX button until all the other mode buttons light up.
2. Enter the code 2835.
3. Press the pound(#) button once.
4. Test the functionality of your iLive sound bar.

Why won't the volume work on my Dish remote?

To make your DISH TV remote control the volume, you need to make sure that

you have fresh batteries on your controller

. Then, what you want to do next is to restart your receiver and your television. Then, reprogram your DISH TV remote for it to be able to control the volume.

How do I put my iLive sound bar in pairing mode?

1. Press the power button to power ON the Bar Speaker.
2. Press the Blue BT on your remote to select the Bluetooth source.
3. Press the Pairing button on the side of the speaker.
4. A blue light will begin to flash on the front of the speaker.

How do I get my soundbar to work?

If you're using an analog connection, make

sure the TV volume is turned up

. If the TV's analog audio output is set to “variable” and you're getting no sound from the soundbar, try turning the TV's volume up. If the TV is turned down all the way, you'll hear no sound even if the soundbar is set to full volume.

How do I program my Dish remote to my soundbar?

Press the Home button twice on your remote. Select “Settings.” Then “

Remote Control

.” Choose “Auxiliary Device.” Then “Audio Accessory.” Select the pairing wizard. Follow the onscreen instructions to choose your soundbar brand and complete the setup.

How do I reset my sound bar?

1. Press and hold the + (volume up) button, (power) button, and (input select) button on the unit for more than 5 seconds to reset the system.
2. Unplug the AC power cord.
3. Plug the AC power cord back in again, and press the (power) button to turn on the unit.

Why isn't my volume working on my TV?

If the TV has a Headphone/Audio-Out settings in the Sound menu, set it to Audio-Out. Make sure all A/V cable connections are properly connected to the TV. Test the TV using another source like a VCR, DVD player or Blu-ray Disc player.

Perform a power reset on the TV

.

How do I program my Dish Network remote without a code?

1. First press “Home” button on your DISH remote twice. …
2. Select “Settings” and then “Remote Control” from on-screen menu.
3. Use on-screen menu to select any device you want to pair.
4. Tap the “Pairing Wizard” option from the menu.

How do you change the audio on DISH Network?

1. Press the MENU button.
2. Select Preferences.
3. Select Alternate Audio.
4. Select your desired language.
5. Select Done.

Why does my soundbar not work with Netflix?

If you're experiencing audio issues with your Netflix on the home theater soundbar,

check for any loose connections or bad wiring

. If the soundbar works with other apps, you can also check the audio settings and change for a compatible option. Check your TV settings too as some will not audio outputs configured.

How do I sync my soundbar to my TV?

1. Sound Control button. Press Sound Control on the soundbar remote, and then use the Left/Right buttons to adjust until sound is synced.
2. Audio Sync button. …
3. Audio Sync +/-

How do I get my TV to recognize my soundbar?

1. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV.
2. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar.
3. Next, change the source on your soundbar to the D.IN.

Where is the reset button on my soundbar?

For a factory reset, you need to locate

the “Off” button on the control panel

. Turn off your soundbar before you hold down the “Off” button for however long it takes for the soundbar to display “INIT OK”. After you see it on your soundbar, you can turn your device back on and try to pair it again with your TV.

Why has my sound bar suddenly stopped working?

If you've connected your television set to the soundbar using a cable but there's no audio, the most likely cause of the problem is

an improper cable connection or a malfunctioning cable

. … Next, ensure the speaker option on the TV is set to external and check again whether you're now getting sound.

How do you get sound through an optical cable?

Securely

connect one end of the optical digital cable to the optical

out on your TV. Connect the other end to the optical in on your home theater or stereo system. The optical cable works properly if you see a red light on both ends.

Why is audio not working through HDMI?

If the HDMI device is not set as default device, you cannot hear the sound from HDMI output. … 1) Right-click on the sound volume icon in the lower right corner of Windows. A context menu will pop up. 2) Click Playback devices.