The pounds of silage in the silo is calculated by
multiplying: Length (ft) x width (ft) x depth (ft) x density (lb/cu-ft) at the final moisture content
. For example the silo is 50 feet long by 30 feet wide and the silage averages 12 feet deep.
How much is silage worth per ton?
| Example 1 | Silage moisture level 70% | Silage dry matter level 100% – 70% = 30% | Silage value at 65% $29.25 per ton | Silage value at 70% $29.25 x (30/35) = $25.07 per ton |
|---|
How many tons of silage do you get per acre?
silage per acre can be expected for each
6 to 7 bushels of grain per acre
. For example, if expected grain yield is 125 bushels per acre, corn silage yields will be about 18 to 20 tons per acre of 30% dry matter silage (5 to 6 tons per acre dry matter yield).
How much corn is in a ton of silage?
Each 7.5 bushels of corn
will yield about one ton of silage. As yields continue to increase, you will see up to eight bushels of grain per ton of silage.
How do you calculate tons of silage?
- Pile bottom length (without ramps) is 60 ft, the filing ramp is gone, so enter 0.01. …
- The spreadsheet calculates 508 tons of dry matter weight in red.
- Divide by 0.35 to convert to standard 65% moisture: 508/0.35 = 1,451 tons wet silage.
How many tons of silage does a cow produce?
A cow can eat about 55-60 lbs of corn silage per day (33% moisture. To grow cattle from 300 to 1000 pounds on only corn silage would require about
7 tons
of silage. Generally you could expect between 20 and 24 tons of corn silage per acre.
What is silage yield?
Based on Grain Yield…for stressed corn, about
one ton of silage per acre
can be obtained from each 5 bushels of grain per acre. For example, if you expect a grain yield of 50 bushels of grain per acre, you will get about 10 ton/acre of 30 percent dry matter silage.
How many tons is a silage bag?
Silage bags come in many diameters and lengths to suit the needs of different operations; 8 ft in diameter and 150 ft long is a common small bag size. While density of silage impacts the capacity of a bag, this size will hold between
100-150 tons
(as-fed).
Is corn used as silage?
Corn harvested for silage is an
important feed crop
on most Pennsylvania farms, where cropland often is limited. The crop provides livestock producers with a high-yielding, relatively consistent source of forage and the animals with a highly digestible and palatable feed.
How much does it cost to chop silage?
The cost of chopping usually ranges from
$4 to $7 per ton
of silage (assumed to contain 35% dry matter). Historically, we have used a charge of $5 per ton. To reflect increasing fuel costs over the past few years, an additional $0.40 per ton was added. Chopping costs per ton decrease as per acre yields increase.
Is silage better than hay?
Moisture content: Hay usually has a moisture content of 12%, whereas silage moisture content is between 40-60%. Storage methods: Hay is mowed, dried and stored in bales. Silage is compacted and stored in air-tight conditions without being dried. … Silage is partially and easily digested, offering
more nutritious value
.
How much silage does a cow eat daily?
Cattle will commonly consume corn silage at a rate of
5 to 7 pounds per 100 pounds of body weight
. A 500-pound feeder calf may consume 25 to 35 pounds of corn silage as-fed daily.
What percentage of corn silage is grain?
How much does grain per ton of silage vary? Grain per ton of
65%
silage ranged from 0 to 11 bushel per ton for individual samples in a UW study. Previous studies have shown an increase in grain per ton of silage for traditional grain hybrids as silage tonnage per acre increased.
Is silage bad for cows?
It’s essential to provide the energy necessary to maintain body condition and the energy necessary for each cow to reach its milk production potential. Silage is an important nutritional tool for achieving those targets. But
silage alone is not nutritious enough
for your dairy cows to reach their potential.
Is silage cheaper than hay?
Today,
silage is much more economical than most hay
, and it may be possible to feed more silage. “Most large feedyards will feed 10% to 15% silage which works well. It’s an excellent roughage source and is still more economical than using alfalfa hay or other hays.
Can you feed straight silage to cows?
Corn silage is a
feed that we don’t typically feed to beef cows
. Corn silage is usually used in growing calf and feedlot diets because of its high nutritive value, especially energy. When hays and alfalfas are expensive, corn silage is a feed that cow/calf producers should consider.
