If it's your intent to maintain a firearm's collectibility and value, the answer is usually “no”;
don't re-blue your gun
. Firearms with an original finish, even if they have visible wear and discoloration are generally more valuable than those that have been refinished (re-blued or parkerized).
How long does it take to Reblue a shotgun?
Immerse the gun parts in boiling water.
This will boil off any remaining bluing solution residue.
Simple parts need to be immersed for 5 to 10 minutes, while complex or ornate parts may need to be immersed for up to 30 minutes
.
Can you're blue a gun barrel?
What is the best bluing method?
Traditionally, bluing was performed using a hot salt method, and currently, cold bluing and hot bluing are performed, both with varying results.
Hot bluing s considered to be the best method only by the addition of heat
, which helps set the bluing solution into place faster than with a cold bluing method.
Should I restore old gun?
If you have an old gun that you want to hunt with,
there's nothing wrong with having it refurbished
—just don't expect to get the money you spend on the gun out of it if you ever sell it. The point of refurbishing is to put a gun into condition where it's safe and makes you happy to take into the field or to the range.
Are old guns worth money?
Just because a gun is old doesn't necessarily make it valuable. In reality,
most older, mass-manufactured guns are actually worth much less than a brand-new model
. For example, if the gun you obtained is a Mossberg 500 made anytime in the 1960s to 2020, it's worth approximately $75 to $300, depending on its condition.
What does bluing liquid do to metal?
Bluing also
helps to maintain the metal finish by resisting superficial scratching
, and also helps to reduce glare to the eyes of the shooter when looking down the barrel of the gun. All blued parts still require oiling to prevent rust.
Do you blue the inside of a barrel?
You're not wrong.
The barrels are blued on the inside too
. I've got mine partly broken in, and I'm told that they really start to shoot after the finish inside the pipe is worn right off. Firearms technology was perfected in the 1870's, and it's been a slow downhill slide ever the advent of smokeless powder.
How is parkerizing done?
Can gun bluing be repaired?
There are also hot bluing solutions that require use of a blowtorch or other heating device to process the bluing
. The “cold” bluing process is more common among gun owners who can easily return their barrel's blue finish without the need of a gunsmith. Proper metal preparation is key to successful bluing repair.
What's the difference between cold bluing and hot bluing?
The cold blue is more of a coating on the steel using chemicals that color the metal. Hot bluing uses harsh caustic salts at closely regulated temperatures and ph levels to actually get into the metal. The mineral content of the water used can also affect the color and quality of the bluing job.
What is the difference between Perma Blue and Super Blue?
Which is why on their website, Birchwood Casey advertises the Super Blue as, “For blueing highly polished steel parts and hardened steels containing nickel and chrome alloys” where
the Perma-blue seems to be promoted more for “touch up” and regular firearm bluing
.
What is the most durable gun finish?
Black Oxide (Bluing)
As one of the least expensive corrosion-resistant finishes on the market, black oxide is often the preferred finish used on gun barrels and small components. Gun oil is important to this type of finish to avoid rusting.
What is nitre bluing?
The nitre bluing process (sometimes referred to as fire bluing, peacock bluing or niter bluing) is
a gun metal finishing process involving a salt bath solution of sodium and potassium nitrates, heated to exact temperatures
.
How many types of gun bluing is there?
There are
four basic types
of gun bluing.
How much is it to refinish a gun?
Current Refinishing Pricing for most gunstocks:
$385 – 445
for most stocks. The amount depends on variables such as type of wood; ease/difficulty of old finish removal; extent and location of dents, gouges, scratches; coats required, etc.
Can you blue a parkerized gun?
“
You can finish a parkerized finished handgun with a polished blue
. However, the cost is much more expensive, and the polished blue finish will show all finger prints and scratches very easily. The polished blue finish is the least durable of any finish on the market.
Does refinishing a gun affect its value?
The stock and fore end wood would be refinished, again, using the original Winchester methods. This is a costly process, at least $2000.00; however,
it could increase the gun's value to about $12,000.00
. A worthwhile return on investment. There are times when even cleaning a gun can destroy its value.
What guns are worth collecting?
- Parker Shotgun. If you own a Parker, you hit the jackpot right off the bat. …
- M-1 Paratrooper. …
- Luger. …
- Nambu. …
- Sharps 1863 Carbine. …
- Winchester 1873. …
- Colt M1911. …
- M1-Garand.
How old does a gun have to be before it's considered an antique?
Under federal law, an antique firearm is any firearm produced
before 1898
. The federal definition also includes replicas, which means the firearm may have been manufactured recently, but if it was manufactured to exactly duplicate a firearm produced before 1898, it is still considered an antique firearm.
What year is a gun an antique?
Under the United States Gun Control Act of 1968, any cartridge firearm made in or
before 1898
(“pre-1899”) is classified as an “antique”, and is generally outside of Federal jurisdiction, as administered and enforced by the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE).
How do you make liquid bluing?
Dilute the bluing liquid in water according to the instructions:
1/4 teaspoon in 1 quart of water (4 cups) for a large load
. Add diluted solution to the final rinse cycle of the wash. For a top loader, pour directly into the drum. For a front loader, add to the dispenser.
What chemical is gun bluing?
Bluing may be applied, for example, by immersing the steel parts of the gun to be blued in a solution of
potassium nitrate, sodium hydroxide, and water
heated to the boiling point, 275 °F to 310 °F depending on the recipe.
Does bluing prevent rust?
Does bluing prevent rust?
Cold bluing is a controlled oxidation of ferrous metals similar to rust
. Whether cold or hot blued, these metals should be treated with a wax, lacquer or water displacing oil to reduce exposure to corrosion causing moisture.
What is hot bluing?
Hot-Bluing a Gun
Thanks to hot-bluing, you can now give your gun a beautiful blue-black finish within a couple of hours at home. The hot-bluing process requires
cleaning your gun's parts before dipping them in a heated bluing solution
. You will then rinse off the bluing solution and clean the gun.
Can aluminum be blued?
“bluing” metal is mostly for steel. It creates an almost black look. It's a chemical process that reacts with the surface of the steel. This look can be mimicked with surface coat material they sell for steel, but
it will not work on aluminum
.
