Two types of exposure techniques may be used for intraoral periapical radiography:
the paralleling and the bisecting angle technique
(Figures 1 and 2). With the paralleling technique, the tooth and the sensor are both kept on a parallel planes.
What is the difference between a bitewing and periapical image?
Bitewing radiographs, usually taken in a 4 film series, provide
high resolution images of both sides
of the mouth, targeting the rear of the jaw from the canines backward. Periapical radiographs can be used to target individual areas of the mouth, as well as the full mouth, and are usually taken in a longer series.
Why is exposure sequencing so important when obtaining radiographs?
All rights reserved. When exposing radiographs, establish an exposure sequence,
or definite order for periapical film placement
. Without an exposure sequence, there is a good chance that you will omit an area or expose the same area twice.
What is the purpose of the periapical image?
Each PA shows the full tooth dimension and includes all the teeth in one portion of either the upper or lower jaw. Periapical radiographs are
used to detect any abnormalities of the root structure and surrounding bone structure
.
What is a more convenient technique for intraoral radiograph?
As previously discussed,
the paralleling technique
is the most accurate intraoral radiographic technique, meeting four of the five principles of accurate image projection. The paralleling technique does not allow for as short as possible object-to-receptor distance (Principle Three) as desired.
What teeth do Bitewings show?
Bitewing X-rays show details of the
upper and lower teeth
in one area of the mouth. Each bitewing shows a tooth from its crown (the exposed surface) to the level of the supporting bone. Bitewing X-rays detect decay between teeth and changes in the thickness of bone caused by gum disease.
What are two techniques for exposing radiographs?
Receptor PLACEMENT
The two most common techniques for taking radiographs are
paralleling and bisecting angle
.
What is the basic principle of the paralleling technique?
The long-cone paralleling technique is based on the following principles:
an increased distance between the radiation source and the film to obtain a bundle of parallel rays; an increased distance (except for the lower molar region) between the tooth and the film to obtain parallelism between the film and the long-axis
…
How do you fix an elongated image?
When elongation occurs using the paralleling technique, the angulation of the x-ray beam is less than the long axis plane of the teeth. To correct this error the operator must
increase the vertical angulation
.
When is periapical radiograph used?
Periapical X-rays are used
to detect any abnormalities of the root structure and surrounding bone structure
. Occlusal X-rays are larger and show full tooth development and placement. Each X-ray reveals the entire arch of teeth in either the upper or lower jaw.
What is a D0220?
D0220:
the first intraoral periapical image taken
Sometimes a complete series is not necessary
, but only a few periapical images are required. This code is used to document the first of these images.
What is periapical image?
A periapical x-ray is
one that captures the whole tooth
. It shows everything from the crown (chewing surface) to the root (below the gum line). Each periapical x-ray shows a small section of your upper or lower teeth. These x-rays are often used to detect any unusual changes in the root and surrounding bone structures.
What are 3 types of intraoral radiographs?
There are three types of diagnostic radiographs taken in today’s dental offices — periapical (also known as intraoral or wall-mounted),
panoramic, and cephalometric
.
How do you read a radiograph?
- Describe the location of the lesion.
- Describe the internal structure of the lesion: radiopaque or radiolucent.
- Describe the size, shape and border of the lesion.
- Describe the effect of the lesion to the surrounding structures.
