The F5 on most Whirlpool ranges will indicate that you have a
problem with the oven door latch assembly
or the oven door switch. Since you are seeing this error code when you are trying to set the self cleaning mode, this is likely the problem with your range. You could have a problem with the door switch.
How do I fix F5 error on Whirlpool oven?
Persistent F5 Errors
Press and hold any key for one minute to clear the
error code, and an F2 code should appear. Press CANCEL and observe the stove for one minute to see if the F5 error reappears. If the error persists, it’s time to replace the latch.
How do you reset the F5 code on a Whirlpool washer?
When using hot water in a Whirlpool washer, you may encounter the “F5” error code on the appliance. To finish the laundry load, reset the washer,
wash in cold water and then fix the error to use hot water again.
What does F5 on the oven mean?
The “F5” error on General Electric ovens means that
the safety circuit failed
. This could occur because of a power failure or an error with the lock circuit. Unplug your oven for 30 seconds and plug it back in. If the error remains, replace the lock circuit, using the oven model number to find the proper part.
How do you clear a F5 E1?
You should disconnect power again for 15 seconds and reconnect and see if that helps. If it doesn’t cure the E1- F5 error
hold the bake button in until E0- F2 appears in the display
. This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.
What is F5 error code?
An F5 error code indicates that
the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time
. This occurs when either the controller on the board or the fan malfunctions.
How do you reset a Whirlpool stove?
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Start a bake cycle.
- Monitor the oven for one (1) minute to ensure the error code does not display again.
- Verify oven operation.
Why does my washer keep saying F5?
Did you receive a F5 E2 lid lock alert? The F5 E2 alert indicates
the washer can’t engage the lid lock because there may be an obstruction in the lid lock area
. Please check the lid lock area and remove any objects in that area.
How do I clear the lock on my Whirlpool washer?
- Locate the “Control Lock/Unlock” button on your Duet’s control panel.
- Press and hold the “Control Lock/Unlock” button for three seconds.
- Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
How do I fix error F5 E3?
Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions.
Touch POWER
to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
How do you clear a Whirlpool oven code?
- Power the unit down by turning off the circuit breaker(s) or fuse(s) for one (1) minute.
- Power the unit up by turning on the circuit breaker(s) or fuses(s),
- Monitor the the product for one (1) minute to ensure the error code does not return.
What does F5 E3 mean on a Whirlpool washer?
The F5 E3 alert indicates
there is issue with the lid lock
. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
What does F5 mean on Maytag oven?
F5. Keypad
Cancel Upper
. This oven error code is seen on electric ranges and indicates that the electronic range control board is faulty. This Maytag error code displays when the cook mode and non-cook mode start simultaneously. Repair or replace the electronic range control board to fix this code.
What does fse1 mean on a Whirlpool stove?
Ranges , Whirlpool , Appliances , Washers. 1 Answer from this member: The error F5E1 indicates the
over door latch is not operating
. I recommend you program a clean cycle and start it and observe if the door will latch.
How do you unlock a Whirlpool oven?
Door is locked when starting or using the oven
Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes,
move the latch arm to the left
to unlock the door.
Press the
“Off/Clear’ button for three seconds
to turn the “Control Locked” child lock off. Reset the cooking program if “Off/Clear” was pressed accidentally. For example, press the “Defrost” button again, and turn the dial to select the defrost time you want again. Press “Start.”
