While screw size is shrouded in mystery, there are four basic sizes of Phillips screwdriver — from #0 to #4 — #0 being the smallest. The most common sizes are
#2 and #1
, #2 for standard screw sizes, #1 for “miniature”.
What is a #2 Phillips screwdriver?
The #2 is a
1/4′′ shaft
, perfect for derailleur adjustment screws. It is the most common cross tip (“Phillips”) required.
What size is a standard screwdriver?
In addition to varying as to the size of the blade or tip, screwdrivers also vary in length. While most jobs can be easily handled with standard length models (these usually average from
about 5 to 8 inches
) there are jobs where a special very short model, known as a “stubby,” will be needed.
Are all Phillips screwdrivers the same size?
Phillips head screwdrivers
are built to work with the same screws
, only those with crossheads instead. Since there are only five sizes of Phillips head screwdrivers, they each fit at least two sizes of screw, but sometimes can even fit up to five like with the #2.
What size is a standard Phillips?
| Type Gauge Size | Slot or Flathead 1/8”, 5/32”, 3/16”, 1⁄4”, 5/16”, 3⁄8” | Phillips #000 , #00, #0, #1, #2, #3, | Allen or Hex 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 mm | Torx T2, T3, T4, T5, T10, T15, T20, T25, T30, T40 |
|---|
What does a 2 Phillips screwdriver look like?
A Phillips screwdriver has
a head with pointed edges in the shape of a cross
, which fit neatly into the cross slots of a Phillips screw. … Phillips screw heads allow a tighter fit than a flat head screw, which is why most factories and handymen use them.
What is a #1 screwdriver?
The Phillips #1 screw is the
most commonly used fastener
in the internals of “larger” electronics like home theater hardware, game consoles, laptops, PCs, and server racks. This particular size of Phillips screwdriver blade is also known as Phillips 1, PH 1, and PH #1. This driver is ESD-safe.
How many different sizes of Robertson screws are there?
Currently, there are
five different Robertson
screwdriver types available, with suitable screw size indicated by the color. Orange drivers (#00) are appropriate for use with screw types 1 and 2. The recess size range (the size of the corresponding square imprint on the screw) is from 1.77-1.80 mm.
What size is a 000 screwdriver?
PSDTM 10 Pieces Precision Slotted and Phillips Screwdriver Set, #000 – #1 Tip Size,
1 – 4 mm
| Staples.
What size is PH0 screwdriver?
PH0 Screwdriver Dia.
1.7MM
cross PHILLIPS 0# Screwdriver (manufacturer) 1PCS Size: Overall length 125MM Handle Dia. 12.7MM Handle Hat Dia.
What is the most common screw size?
The most common size is
#8
(approximately 5/32-inch in diameter), but the appropriate size of screw will depend on your individual project.
What size is PH000 screwdriver?
1.5mm
Phillips Screwdriver, PH000 Precision Screwdriver for iPhone Samsung Cell Phone Laptop PC Repair Tools – – Amazon.com. In Stock.
Is Torx better than Philips?
By design, Torx head
screws resist cam-out better than Phillips head or slot head screws
. Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, Torx heads were designed to prevent cam-out.
What size is a #2 Phillips bit?
| Driver size Wood screw size Machine screw size | #2 #5–9 M3.5 , M4, M5 or #5–10 | #3 #10–16 M6 or #12, 1/4 in., plus 5/16 in. if round-head | #4 #18–24 M8, M10 or 3/8 in., 9/16 in., plus 5/16 in. if flat-head | #5 5/8 in., 3/4 in. |
|---|
What is a #4 Phillips screwdriver?
The No. 4 Phillips-head screwdriver features an
alloy-steel blade
, which has been heat treated for uncompromising strength. Plated with a satin-nickel finish, the durable blade is corrosion resistant, perfect when working in a variety of environmental conditions.
What is a standard screwdriver?
The
tool used to drive a slotted screw head
is called a standard, common blade, flat-blade, slot-head, straight, flat, flat-tip, or “flat-head” screwdriver. This last usage can be confusing, because the term flat-head also describes a screw with a flat top, designed to install in a countersunk hole.
