How Long Does Bathworks Last?

With proper care and maintenance, refinishing can extend the useful life of your fixtures for up to

15-20 years or more

. In fact, we’ve been around long enough for many of our customers to tell us that their bathtubs still look and feel great after more than 15 years.

How long does Bathworks refinishing last?

With proper care and maintenance, refinishing can extend the useful life of your fixtures for up to

15-20 years or more

. In fact, we’ve been around long enough for many of our customers to tell us that their bathtubs still look and feel great after more than 15 years.

Is Bathtub Refinishing worth it?

Bathtub refinishing is

worth the money if your tub is in good working condition

. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You’ll have to buy a new tub soon anyway.

How many times can a tub be reglazed?

Refinishing can be done by professional installation or by using a do-it-yourself reglazing kit. Such repeated refinishing applications cannot be repeated indefinitely. Refinishing is regarded as a temporary fix in the best of circumstances, and

two refinishing coatings

are the most you can reasonably expect to apply.

Do bathtubs wear out?

Bathtubs are one of the more durable fixtures in your home, but

over time, even bathtubs wear out

. If your tub is made of plastic, for example, abrasive cleaners can damage the surface. If it’s made of porcelain or steel, it may be prone to chipping. If made of a cast polymer, the finish will eventually wear off.

Why is my bathtub peeling?

A variety of issues may lead to a reglazed bathtub peeling, including a chip in the surface. … Chips may be caused by dropping something heavy onto the surface or using harsh cleaners or scouring pads on the tub.

Poor refinishing may

also lead to peeling, such as when the glaze is not allowed enough time to cure or dry.

Do bathtub refinishing kits work?

Bathtub refinishing kits are

versatile

. Most are capable of working with the most common bathtub materials, including cast iron, porcelain over metal, fiberglass, and acrylic.

Can I resurface my bathtub myself?

Lining a tub costs nearly as much as bathtub replacement, and it is not a project homeowners can tackle themselves. … Refinishing essentially involves painting on a

very hard epoxy coating over

the existing enamel, acrylic, or fiberglass tub surface.

What is the average cost to refinish a bathtub?

A typical bathtub reglazing cost is

$500 to $700

.

What is the difference between bathtub refinishing and reglazing?

So the main difference between the “bathtub refinishing” and “bathtub reglazing” is that

the former refers to the entire restoration project and the latter refers to the commercial coating applied at the end of the process

.

Does reglazing a bathtub last?

The short answer is that a professional reglaze will last

10-15 years

. The long answer is that there are other factors in prolonging the glaze and finish of your bathtub. Refinishing helps protect the integrity of your bathtub.

Is it safe to bathe in a reglazed bathtub?

The

epoxy coatings

used to finish bathtubs can also emit dangerous vapors such as isocyanates when sprayed. These are classified as potential human carcinogens according to the U.S. Department of Labor, and protective gear should be worn when working with them.

How often should you replace your bathtub?

Bathtub or Shower:

Every 10-15 Years

If your bathtub or shower has been reglazed or refinished, it’s recommended that you replace it 10-15 years after having this done. Of course, if you’re planning a bathroom renovation, updating your shower or tub is a must!

How can I make my bathtub look new again?

1. Sprinkle baking soda on stains.
2. Spray with warm water.
3. Leave 10-20 minutes.
4. Scrub with Mr. Clean Magic Eraser or soft sponge.
5. Rinse.
6. Dry with a soft microfiber cloth.

How do you know if you need a new bathtub?

1. It’s Stained. Not only do stains make your tub look awful, they’re also a breeding ground for harmful germs and bacteria. …
2. It Leaks. …
3. It’s Full of Mold & Mildew. …
4. It’s Difficult to Use.

Is it difficult to replace a bathtub?

Replacing an old bathtub with

a new bathtub is a very difficult project

. … If you have to open a wall to remove the old tub and position the new tub, the task is much harder. You will need a helper to move out the old tub and set in the new one. You may want a professional plumber to make tub connections.