- Stay focused. Be extra aware of your surroundings when you're driving. …
- Don't slam on your brakes. Avoid suddenly hitting the brakes. …
- Avoid lane switching. Avoid last-minute lane changes if you see a construction zone up ahead. …
- Drive with the flow of traffic.
When driving through roadway zones What should you do?
Maintain your normal speed the whole way through the zone
. When entering and driving through a work zone, slow down and be prepared to stop. Obey posted speed limits and be alert to conditions around you. Workers could be present.
When driving in work zones What should a driver do?
When driving in a work zone,
keep a safe distance between your vehicle and traffic barriers, trucks, construction equipment, workers, and other vehicles
. Increase your following distance and do not tailgate.
What is the most common collision in a work zone?
Rear-end crashes
(running into the rear of a slowing or stopping vehicle) are the most common type of work zone crash. Fatal work zone crashes occur most often in summer and fall.
What is the safest speed to drive your car?
Typically, the prevailing speed is what traffic engineers use to determine what the official speed limit should be on any given road. Speed limits are set using the speed of which
85% of traffic flows
. Studies show that this 85th percentile is the safest speed level.
What is the first thing you should do upon entering your vehicle?
- Lean in and stick the key in.
- Sit down and adjust seat if necessary.
- Check mirrors.
- Clutch and brake in.
- Parking brake off.
- Neutral.
- Start the car.
- Select tunes.
How much following distance should you give yourself while driving in a work zone?
Don't follow too close.
The most common crash in a work zone is a rear-end collision. Remember to give yourself
at least seven seconds of braking distance
between you and the car in front of you.
What is true of work zone?
All of the above. Work zones are
often stationary
, but they may also be present in the form of moving vehicles striping lines, mowing, or removing snow. Work zones are marked by orange signs with black lettering or symbols. Slow down and pay extra attention when approaching or driving through a work zone.
What is a work zone crash?
Work zone crashes are defined as
taking place within the boundaries of a work zone or on an approach to or exit from a work zone
due to activities, behaviors, or controls related to traffic moving through the boundaries of a work zone.
How do you avoid a work zone crash?
- Always maintain a proper following distance. At 50 to 55 mph use the six-second rule. …
- Avoid all distractions. …
- When making a lane change leading in to or exiting the work zone, use the “lean and look” method to eliminate any blind spots around the front of the truck.
What is the minimum tread thickness?
Most states require a minimum of
2/32 of an inch
(approximately 1.6 mm) of tread, but two require less, some have no requirements, and some defer to the federal criterion for commercial vehicle safety inspections.
What four factors should you take when selecting a safe speed?
What factors should you consider when selecting a safe speed?
Amount of traffic, inclement weather, hills, curves, intersections and very narrow roads or lanes
.
How far ahead do your headlights allow you to see at night?
Your headlights only let you see
about 350 feet ahead
. Be sure you are driving slow enough to stop or turn if needed. Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.
Why should you drive more slowly in heavy traffic?
Drive slower in heavy traffic because
you have less room
. Drive slower so you can stop in the distance you have. As a general rule, drive more slowly: Shopping centers, parking lots, and downtown areas.
What 3 documents should you have inside your vehicle?
- Registration certificate. This document acts as proof that you have registered your vehicle with a regional transport office. …
- PUC Certificate. …
- Driving licence. …
- Insurance policy. …
- Any other required permits.
What is the first thing you should adjust if needed when you get into a car to drive?
What is the first thing you should adjust, if needed, when you get into a car to drive? When preparing to drive, you should first
adjust your seat
to ensure that you are in a comfortable position and can see the road clearly. Adjust your mirrors and steering wheel to be effective when your seat is fully adjusted.
