Where To Buy Surfboard Wax?

by | Last updated on January 24, 2024

, , , ,
  • Bubble Gum.
  • Fu Wax.
  • Sticky Bumps Munkey Wax.
  • Sex Wax.
  • Kassia’s Palo Santo Surf Wax.
  • FCS Surf Wax.
  • YEW! Your Environment’s Wax.
  • Sticky Bumps Original.

Where can I get my surfboard waxed?

Wax should be applied

in the working foot zones of the surfboard

. Always add an extra area in case you need to move into unusual sections of the stick. Longboarders are the only ones who usually wax their entire boards.

What can I use instead of surfboard wax?

  • 60 to 70 percent paraffin.
  • 15 to 20 percent microcrystalline.
  • 5 to 10 percent petroleum jelly.
  • 5 to 10 percent adhesive (vistanex)
  • A dash of dye and scent.

How do you make homemade surfboard wax?

  1. Place three and a half parts beeswax, one part coconut oil, and one part tree resin (optional) in a large cook pot;
  2. Heat gently in a double boiler, keeping the mixture moving;
  3. Stir the mixture until all ingredients are liquefied;

Is Surf Wax sticky?

The Sticky Icky

Though super gooey wax formulas may have existed in the past, they’re enjoying a renaissance.

Aerial surfers have rediscovered the foot-philic properties of super sticky varieties

, which, in addition to their natural tackiness are known to retain those properties through a huge temperature range.

Do you need a base coat for Surf Wax?

APPLY THE BASECOAT WAX


Applying the basecoat is the most important step when you wax a surfboard

. The top coat of wax is what you feel when you surf but will rub off as you use your surfboard. The basecoat will stay in place and ensure you stay in place while surfing even if the topcoat does rub off a little.

How do you wax a surfboard like a pro?

How do you remove old wax from surfing?

  1. Set board in the sun for about 15 minutes, or carefully apply heat with a heat gun or hairdryer.
  2. Scrape wax off with wax comb.
  3. If wax remain, use flour or a wax remover to loosen excess wax.

When should I wax my surfboard?

But how often you should wax your board? You can and often should top up your board every time you surf. But, depending on the temperature of the water you surf in, you should fully clean and re-wax your board

every 2-3 months, or 4-6 times per year

. Adding wax to your surfboard provides grip.

Can you use a candle to wax a surfboard?

Once all of the wax is melted, place a candle wick in the center of the vessel and slowly pour the wax into the vessel, filling it up about 2/3rd of the way. Hold the wick in place until the wax begins to re-set. After the wax has cooled and set, you are finished!

Do gas stations sell surf wax?

Do Gas Stations Sell Surf Wax? Once again, where you stay or where you are at the time will depend if different shops sell wax or not. For example,

a gas station close to a popular surf break may stock things such as surf wax and surfboard leashes

.

Can you use skate wax on a surfboard?


Absolutely not

. While both are made from a base of paraffin, surfboard wax also typically has beeswax in it, which is applied to things to make them non-slip (it’s used to coat hardwood floors too to make them stickier).

Why is coconut oil used in surf wax?


It helps calm the irritated skin, and it moisturizes to minimize peeling

. On most websites this is used related to body hair waxing, but for the sake of this article, it’s applied to surf wax. It’s sticky, at times it’s icky, but wax is a necessary pain in the a$$ when it comes to surfing.

How do you make surf wax without tree resin?

All you do is

mix 2,250 g of beeswax with 750 ml of coconut oil

. First melt the wax, then warm the oil and stir into the wax. Stir well, stir some more, and then continue stirring.

Can I use beeswax on my surfboard?


The paraffin base for your surfboard is beeswax

, a product easy to find in herbal and eco-friendly stores, as it ́s coconut oil. However, the tree resin may be a little more resistant to be found.

Is Tropical wax the same as base coat?

A base coat is nothing more than a harder wax.

It’s really just the same as our tropical and warm water wax

.” But get out there and try some different formulas and applications.

How do you wax a surfboard for the first time?

Can you use warm water surf wax in cold water?


If you use warm-water wax in cold water, the wax will become hard and fail to provide much traction

. Conversely, cold-water wax will melt off a surfboard in warm water.

Can you put too much wax on a surfboard?

When you apply too much wax to your board, you may find that it’s harder to stay upright. Simply put,

using too much wax makes your board more slippery and increases the chances that you will fall while surfing

.

How long does surf wax last?

Depending on how often you surf, you should be stripping and applying a fresh coat of wax every

eight to twelve weeks

, or between four and six times a year. The frequent reapplication of wax before surfing, the sand and dirt that sticks in the wax, all need to be cleared every so often.

Should you wax a foam surfboard?

So even though you don’t strictly have to wax a soft top surfboard,

we definitely recommend that you should

. A quick coat of wax on the top of the deck will go a long way towards giving you the traction you need to effectively surf.

How far up do you wax a surfboard?


If you are using a longboard, wax the entire topside of the board from nose to tail and edge to edge

. If you are using a shortboard, wax the topside of the board from the front logo to the back edge (about two thirds of the length) and from edge to edge.

How do you get bumps on your surfboard?

Do you wax the rails of a surfboard?

Tips and Tricks for Waxing a Surfboard:

Apply wax to a room temperature board. If your board is hot, the wax will melt when applied, and won’t form bumps as well. There’s no such thing as over-waxing your board, so don’t be afraid to apply more if you’re uncertain, but

do avoid putting wax on the rails

.

How do I make my surfboard white again?

For a quick and effective way to remove some of the yellowing that has occurred to the fiberglass lamination,

use a 3M Scotch Brite pad

. By using a gentle application to the surface of the board, you’ll notice an immediate result. The pad is made up of aluminum oxide and is designed for polishing surfaces.

What can I use instead of a wax comb?

An actual “wax comb” is not a necessity and a variety of materials can be used that have a straight edge and are slightly flexible, but not sharp, such as a plastic putty knife or scraper. The best way to accomplish this task is to use

a scraping device in combination with a heat source and “magic dust”

.

What is surf wax made of?

 Today surf wax is generally composed of

a mixture of paraffin, beeswax or other hard waxes

, petroleum jelly can also be added to create a softer wax.

Rebecca Patel
Author
Rebecca Patel
Rebecca is a beauty and style expert with over 10 years of experience in the industry. She is a licensed esthetician and has worked with top brands in the beauty industry. Rebecca is passionate about helping people feel confident and beautiful in their own skin, and she uses her expertise to create informative and helpful content that educates readers on the latest trends and techniques in the beauty world.