The gas fireplace repair cost that you’ll pay depends on what type of repair you need. The average fireplace repair price is
between $40 and $60
, but some repairs could cost as much as $2,000.
How much is a new propane fireplace?
| Average Cost to Install a Fireplace | National average cost $4,000 | Average range $2,650-$5,800 | Minimum Cost $600 | Maximum Cost $10,000 |
|---|
How do you service a propane fireplace?
- Step 1: Make Sure Gas is Turned Off. …
- Step 2: Disassemble the Fireplace. …
- Step 3: Inspect and Brush. …
- Step 4: Vacuum Away Dust and Cobwebs. …
- Step 5: Polish Glass and Metal. …
- Step 6: Wipe Down Mantle and Hearth. …
- Step 7: Reassemble the Gas Fireplace.
How much does it cost to rebuild a firebox in a fireplace?
If the firebox needs repair, it will cost between
$160 to $750
, depending on the severity of the damage. If it’s made of stone, expect that cost to climb to $1,500 or $2,500.
How much does it cost to replace a thermocouple on a gas fireplace?
When replacing a thermocouple or thermopile with the help of a professional, you can expect to pay
between $150 and $250
.
How do you fix a broken fireplace?
How much does it cost to run a propane fireplace per hour?
Most of the heat that is produced will go up the chimney in this case. For the equivalent in a gas insert or gas fireplace, a large could use about 40,000 BTU/hour and in this case would cost about $0.40/hour to operate for natural gas and about
$1.31/hour
for propane.
How much does it cost to convert to a gas fireplace?
gas fireplaces can also provide more heat and warmth than electric or ethanol fireplaces.
The average cost to convert a fireplace to gas is $3,000, with a typical range of $500 to $5,500
, depending on a range of elements, including whether you choose a vented gas insert, vented gas log, or ventless gas log.
Is it expensive to run gas fireplace?
In short: Gas fireplaces are
quite inexpensive to run
. This is primarily due to the low cost of natural gas and propane. On average, 100,000 BTU worth of heat costs $1.09 if you use natural gas and $3.87 if you use electricity.
How do I know if my propane fireplace is leaking?
Checking for a propane tank leak is easy. Apply soapy water or a special leak detector solution to where the propane tank’s cylinder valve and regulator outlet connect. Next, you’ll need to slowly open the cylinder valve.
Bubbles will form if there is a leak
.
Do propane fireplaces need to be cleaned?
While gas fireplaces don’t produce creosote,
they do still need annual cleaning
. Both propane and natural gas are clean burning gas fuels, so they don’t produce the same byproducts as wood, but they can still produce buildup that needs to be cleaned away.
What is the lifespan of a gas fireplace?
How Long Can a Gas Fireplace Last? Generally speaking, you can get a good
ten to fifteen years
of use before you need to replace your gas fireplace.
How do you fix a fireplace firebox?
How much does it cost to replace refractory panels in a fireplace?
Cost to Replace Refractory Panels in a Fireplace
Replacing refractory panels cost
between $100 and $300
. This cost is for replacing one panel, so you may have to pay much more if you need multiple panels replaced.
Can you replace a firebox?
The firebox is an essential part of any fireplace, and replacing is difficult — but
it’s possible
. For the most part, fireboxes are cubic chambers that house the wood (or other solid fuel source) and the flames of the fire. Replacing a firebox may extend the life of your fireplace.
How do I know if my thermocouple is bad on my gas fireplace?
How much do thermocouples cost?
1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs
$5 to $10
. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly.
How do you fix a gas fireplace that keeps going out?
- Before You Begin: Is Your Pilot Light Lit Inside Fireplace?
- The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit.
- Check Your Thermopile Output with the TH/TP Contacts.
- Don’t Replace Your Thermopile or Thermocouple Right Away.
- Cleaning the Thermopile.
- Re-test the Cleaned Thermopile.
How do you replace a fireplace insert?
How do you Regrout a fireplace?
How do you replace a fireplace?
Can you heat your house with a propane fireplace?
Installing a propane fireplace will heat your home efficiently, keep costs down, and add ambiance to any room
. Don’t wait until the chill is in the air! Install a propane fireplace an stay warm all season long.
Can you get carbon monoxide poisoning from a propane fireplace?
Propane Fireplace Safety
A traditional propane fireplace should always be vented outside.
Failure to properly vent a fireplace causes the carbon monoxide to enter the home instead of outside and can result in carbon monoxide poisoning and death in a matter of minutes
.
Do gas fireplaces really heat a room?
Gas fireplaces rely on consistent combustion to produce real flames and keep the fire burning for long periods of time. Overall,
gas fireplaces are highly efficient when it comes to heating a room
. Once a fire has been burning for some time, it’s likely to heat a room rather quickly.
What is difference between gas fireplace and gas insert?
Gas fireplaces are very similar to gas inserts. They are made the same way, with the box-within-a-box setup. However, the difference between gas fireplaces vs. gas inserts is that
a built-in gas fireplace doesn’t require an existing fireplace or chimney
.
Do you need a chimney for a gas fireplace?
A gas fireplace does not need a chimney
. There are two main options to choose from, either a vented or ventless gas fireplace. Vented options are safer because they remove toxic fumes from the home and do not deplete the oxygen inside. For either option, you do not need a traditional chimney.
How much does a gas fireplace cost to run per hour?
The average price of natural gas in the US in 2020 was around $11 per thousand cubic feet
1
, equating to about $1.06 per therm. That means that a 38,000 BTU gas fireplace costs approximately
$0.40 an hour
to run.
