What Would Cause The SRS Light To Come On?

by | Last updated on January 24, 2024

, , , ,

If the SRS light stays on or starts flashing on and off, you may have a

problem with the airbags themselves

, a loose wire, a faulty seat belt buckle, or a problem with the Engine Control Unit (ECU) that is causing the airbag warning light to stay on.

How do I fix my SRS light?

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Can I drive my car with the SRS light on?

So is it safe to drive with an SRS light on?

The answer would be no

, Even though there’s a possibility that the airbags could still deploy with the light on it is a huge risk if one were ever involved in an accident. We recommend having a professional look at it and diagnose the issue to have fixed immediately.

How do I get my airbag light to turn off?

  1. Turn on the ignition switch with your car key. …
  2. Wait for the airbag warning light to turn off. …
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.

Why is my airbag light coming on and off?

When the airbag light turns on, this means that

the airbag system is not properly functioning

. … If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal.

Will disconnecting battery reset SRS light?

Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the

light will stay off

. If it comes back on then the best thing to do is to take your car in for a diagnostics scan.

How much does it cost to fix SRS light?

What is typical cost to resolve an illuminated Supplemental Restraint System (SRS) Warning Light? Expect to pay

between $100 to $200 for the initial diagnostic

. In this instance, look for reputation versus cost, so do not shop just on price.

Will airbags deploy if SRS light is on?

The light coming on tells you that there’s a problem with your car’s airbag system. The first and most important thing to remember if your airbag warning light comes on is that, should

you be involved in an accident, your airbags will not deploy.

How do I know if my airbag sensor is bad?

Symptoms of a failing airbag sensor

You can easily tell if the sensor is functioning

if the airbag warning light on the dashboard is illuminating every time you start the vehicle

. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.

What is SRS malfunction?

SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a

problem with the airbags

or the components that are part of the SRS system.

Can a blown fuse cause the airbag light to come on?


Blown fuses can definitely cause the airbag light to come on

. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

What does the airbag light look like?

The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with

a large circle (the airbag) in front of the person

. It will normally light up briefly each time you start your vehicle, and then go off.

What does the red airbag light mean?

The airbag light is an indicator that

there is a problem with the vehicle’s Supplemental Restraint System

. … When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision.

Where is the seatbelt sensor located?

The seat belt sensor can usually be found in

a vehicle’s SRS airbag module

, sometimes referred to as the ECU, or engine control unit. The SRS airbag module or ECU is usually located beneath the driver’s or front passenger’s seat, but it can be found in a few different locations as well.

How much does it cost to reset airbags?

At the very least, the ECU or airbag module will need to be reset costing

about $50 to $150

. If the airbag control module needs replacing, expect to pay anywhere from $400 to $1,200 for a new one.

Where is the fuse for SRS light?

The fuse block is

on the driver’s side of the engine compartment

. Pull out the SRS fuse. In most models, this is fuse #40, located in the lower right corner of the fuse block.

Rebecca Patel
Author
Rebecca Patel
Rebecca is a beauty and style expert with over 10 years of experience in the industry. She is a licensed esthetician and has worked with top brands in the beauty industry. Rebecca is passionate about helping people feel confident and beautiful in their own skin, and she uses her expertise to create informative and helpful content that educates readers on the latest trends and techniques in the beauty world.