What Would Cause A Knocking Noise In Rear Wheels?

by | Last updated on January 24, 2024

, , , ,

Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Sway bars can help keep a vehicle from rolling over when going around a sharp corner.

If the sway bar breaks or is damaged it

may produce a clunking or knocking sound, especially when going over bumps.

Why is my back wheel making a knocking sound?

Bad Tires/Bad Left Tire – A knocking sound may be heard when tires go bad, if they are unbalanced or misaligned, or if there is a broken belt in one of the tires. Wheel Bearings –

If a wheel bearing is severely worn out the wheel will not be able to spin freely

. This may cause a knocking sound to be heard.

What is the banging noise in the back of my car?

A banging noise can come from many different parts in the rear of your vehicle. … A bearing tends to make more of a rubbing or roaring noise. A banging can be the

result of a failed strut or rear track arm with bad bushings

. These usually make more noise when going over bumps or rough roads.

Can wheel Alignment cause knocking noise?

If you have severely misaligned tires or something in one of your tires has actually broken, then

every time it rotates and hits the road

it’s going to create a noticeable bump or a knocking sound. If the tires are still in good condition, then a proper alignment should be able to eliminate this for you.

Can a wheel bearing make a knocking sound?

Knocking/Clunking Noise While Turning

When a wheel hub bearing wears out, it puts

extra stress on the CV-joint

. That can cause the knocking/clunking noise when you turn the vehicle.

Why is my suspension knocking?

A knocking sound when

going over bumps can indicate a problem with the suspension struts

. … This could show the rubber bushes that join parts of the suspension have failed. Alternatively the clanking noise might get faster the quicker the car is going. This might be a wheel bearing, brake rotor or even a drive shaft.

What causes a knocking sound when driving?


A bad serpentine belt

could be a culprit of knocking noises. A normally functioning belt turns smoothly when the engine runs. When the belt stretches or goes bad, you’ll hear a rattling noise as you’re driving. To fix this issue, take it to a mechanic.

What does a clunking noise mean?

Clunking

If your car makes a clunking sound when you use the brakes, it could mean

there is significant wear or damage to the brake discs, calipers or pads

. If the clunk happens when you drive over bumps, there might be a problem with your car’s suspension, or part of the exhaust could be loose.

What are the signs of a bad wheel bearing?

  • Humming Noise. The most easily identifiable and most common symptom of bad wheel bearings is an audible one. …
  • Squealing, Growling. …
  • Clicking Sound. …
  • Wheel Wobble. …
  • ABS Failure. …
  • Uneven Tire Wear. …
  • Vehicle Pulls to One Side. …
  • Steering Wheel Vibration.

What do bad ball joints sound like?


Metallic clunking noise

: One of the most noticeable and common symptoms of a bad ball joint is a clunking or knocking noise when the suspension moves up and down. A worn ball joint will begin to rattle inside the socket when driving over an uneven road, rough terrain, potholes or speed bumps.

What is clunking sound in front end?

If you hear a clunk when the suspension works over bumps,

you may have excessive clearance in a joint due to wear

. It might be as simple as a loose nut on the strut, or something more subtle such as a shrunken, dried-out rubber bushing.

What is the sound of a bad wheel bearing?


Squealing & Growling

The classic sounds of a bad wheel bearing are cyclic chirping, squealing and/or growling noise. You can also tell that the sound is related to wheel bearings if it changes in proportion to vehicle speed. The sound can get worse with every turn, or it can disappear momentarily.

What can cause a clunking noise?

  • Bad control arm bushings.
  • Damaged ball joints.
  • Worn out struts.
  • Damaged or worn-out shock absorbers.
  • Damaged leaf spring shackles.
  • Loose body mounts.

How long will a wheel bearing last after it starts making noise?

However, a wheel bearing can last an average of anywhere from 136,000 to 160,000 km which is

about 85,000 to 100,000 miles

.

How can you tell the difference between bad CV joints and bad wheel bearings?

Often, a bad CV axle will make a

clicking noise

when steering the car left or right. A bad bearing makes an intermittent roaring noise, until it fails catastrophically. CV joints clunk or make louder noises on tight turns. Wheel bearings get louder with speed.

Why is my engine knocking at idle?

If you’re hearing engine noise like engine knocking or engine tapping, it can indicate that the vehicle is

running low on oil

. It can also mean that an engine part, such as a valve is wearing out. A whistling noise can indicate a cam shaft belt is misaligned or there is an intake leak. … Engine knocks at idle.

Jasmine Sibley
Author
Jasmine Sibley
Jasmine is a DIY enthusiast with a passion for crafting and design. She has written several blog posts on crafting and has been featured in various DIY websites. Jasmine's expertise in sewing, knitting, and woodworking will help you create beautiful and unique projects.