From the Home Screen, navigate to and select Source. You should see the DVD player, then select the corresponding input using the TV’s remote. 2. Now open the disc tray of the DVD player, put in your DVD and press play.
Why won’t my DVD player work on my smart TV?
Play a different DVD to determine whether or not the problem is being caused by the disc itself. NOTE: If the issue only occurs with the first DVD, then
the disc may have dust, fingerprints or scratches
. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .
What channel should TV be on for DVD player?
DVD players will display on
one of the Input or Auxiliary channels
. They will not show up on Channel 3 or 4 like some VCRs. Some TVs will label the Input channels based on the type of input, such as “HDMI”, “AV”, and “COMPONENT.” Refer back to Method one if you have a question about which input type you are using.
How do I hook up a DVD player to a Samsung TV without HDMI?
Connect the 3 separate connectors of component video cable with the COMPONENT VIDEO IN BD/DVD port of your receiver. Connect the red and white cables of your component video cable to the AUDIO IN BD/DVD ingang.
Can I connect an old DVD player to a new smart TV?
Yes, you can connect an old DVD player to a new TV as long as your DVD player and TV have either HDMI ports or audio and video ports
. Some old DVD players have both so you shouldn’t have any problem hooking it up with your new TV.
Why is my Samsung DVD player not working?
Attempt a power reset by pressing and holding the Fast Forward button for more than 5 seconds
. All of the player’s settings will be reset to their factory settings. If the power does not turn off, unplug the power cord from the electrical outlet for one minute, and then plug the cord back in.
Do you need a DVD player with a smart TV?
DVD player is not needed
. Both DVD and Blue Ray can be viewed. You need an HDMI cable to connect with a tv. It handles Audio and Video signals.
How do you watch a DVD on a TV?
When connecting the DVD player to a television, you will need to
use the Audio/Video connector cables to connect the cables to the appropriate Audio/Video inputs on your television
. Once you have connected the Audio/Video cables, you will then need to select the appropriate A/V input.
How do you hook up a VCR DVD player to a smart TV?
How do I get my Samsung DVD player to work?
- Locate the HDMI input on the back of the Samsung TV. …
- Insert one end of the HDMI cable into the “HDMI IN” port. …
- Plug the other end of the HDMI cable into the “HDMI OUT” port on your DVD player.
How do I turn on my Samsung DVD player?
How do I unlock my Samsung DVD player?
Turn on the Home Theater System.
Press the STOP button and the EJECT button simultaneously for five seconds
. The message UNLOCKED will be displayed to indicate that DVD disc tray is unlocked.