Terms in this set (10) What option do employers have when conventional fall protection systems are not feasible and might even put workers at risk?
A Fall Protection Plan must be put in place
when conventional fall protection systems are not feasible or might put workers at risk.
What are the ways an employer can protect workers from fails?
Guardrail and safety net systems
are two ways to protect workers from falls on the job. If workers are more than 6 feet above the lower surface, some type of fall protection must be used by the employer. midrails, screens or mesh are installed when there are no walls at least 21 inches high.
Do employers need to have rescue procedures in place in the event of a fall?
Under 29 CFR 1926.502 (d) (Fall protection systems criteria and practices),
OSHA requires that employers provide for “prompt rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves
.” This should include identifying rescue procedures that address the potential for …
What must be used as part of a fall protection plan when no other alternative measures can be implemented?
The fall protection plan must include a
statement which provides the name or other method of identification for each employee
who is designated to work in controlled access zones. No other employees may enter controlled access zones.
What OSHA standard should an employer follow regarding fall protection?
OSHA requires that fall protection be provided at elevations of
four feet in general industry workplaces
, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What are the 4 high hazard areas?
What makes up OSHA’s focus four highest risk hazards are
falling, electrocution, getting hit by an object, and getting caught between objects.
What are the 4 methods of fall protection?
Categories of Fall Protection
All active fall protection for the construction industry falls into four basic categories:
fall arrest, positioning, suspension, and retrieval
. OSHA provides standards for each category of fall protection.
What must a fall protection plan include?
- State information about the job site. …
- Assess the fall hazards on site. …
- Outline the fall arrest or restraint methods and fall protection equipment being used. …
- Outline the assembly, maintenance, inspection, and disassembly procedures for equipment being used.
What is a fall protection rescue plan?
What is a Fall Rescue Plan? A rescue plan is
a strategy or procedure, planned in advance, to safely retrieve a person who has fallen from an elevated work surface and is suspended in a full body safety harness
. This may include self-rescue or a mechanically aided rescue using a davit arm or rope and winch.
Can every walking or working surface be a fall hazard?
Not every walking or working surface can be a potential fall hazard
. … In construction, falls to a lower level are a major cause of fatalities.
What is the best fall control?
1.
Hazard Elimination
. The preferred solution to all fall hazards is elimination.
What are 3 types of fall protection devices?
- Positioning – These systems hold workers in place while leaving their hands free, to allow them to work. …
- Suspension – These systems lower and support workers while leaving their hands free for the activities they need to perform.
At what height is fall protection required on scaffolds?
The standard requires employers to protect each employee on a scaffold
more than 10 feet (3.1 m)
above a lower level from falling to that lower level.
Which fall protection is not allowed at a leading edge?
Each employee on a walking/working surface 6 feet (1.8 m) or more above a lower level where leading edges are under construction, but who is not engaged in the leading edge work, shall be protected from falling by
a guardrail system, safety net system, or personal fall arrest system
.
What is the 6 foot rule in construction?
On appeal, the employer argued that the construction industry, as well as countless ALJ and Commission decisions, have recognized a “six-foot rule” that
requires fall protection only when employees work six feet or less from an unprotected edge that is six feet or more above the ground
.
At what height is edge protection required?
Building Regulations part K
This edge protection needs to consist of at least two horizontal rails and have a
minimum height of 1100mm
.
