How Much Does Wiper Motor Cost?

A replacement wiper motor could cost you anywhere

between $35 and $430

on parts alone. Labor costs can vary between $80 and $100.

How much does it cost to replace windshield wiper motor?

Windshield Wiper Motor Replacement Cost – RepairPal Estimate.

Labor costs are estimated between $79 and $99

while parts are priced between $222 and $254. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How do I know if my windshield wiper motor is bad?

1. Wiper blades move slower than programmed.
2. Wiper blades only have one speed.
3. Wiper blades don’t move.
4. Wiper blades don’t park in the correct position.

How long do wiper motors last?

Windshield wiper motors are designed to last

up to 1.5 million wipes

, so they should be able to keep the rain, snow, and road grime off your windshield for years and years. But sometimes, these motors just wear out.

How do you fix a windshield wiper motor?

Locate the windshield wiper motor. It is

usually mounted to the vehicle’s firewall between the engine and driving compartment

. If you have trouble locating it, consult the service manual for your year and model vehicle.

How do you test a wiper motor?

Use the fuse pattern shown on the cover and locate the wiper motor fuse. Test the fuse

using your twelve volt test light

. Clip the ground lead to a solid ground source and touch the positive lead to each side of the fuse. If the test light lights up on both terminals, the fuse is good.

Can a windshield wiper motor Be Fixed?

There’s no recourse but to replace

these. Unfortunately, some of these parts have no part number from the dealer, requiring you to replace an entire expensive assembly—or improvise.

How do you know if your windshield wiper fuse is blown?

The blown fuse will cut the power, shutting down the wiper system. Solution: Check your owner’s manual for the location of your fuses, and to identify which fuse protects the wiper motor.

Pull out the fuse and inspect it

— if it’s blown, you should be able to see a broken wire inside it, or char marks.

How many watts is a wiper motor?

Wiper motors will probably not exceed

50 watts

(4.2 amps at 12 volts). A 30 amp motor will require 360 watts and probably produce at least 250 watts of mechanical power. An engine cooling fan or cabin heating/cooling fan might approach that power level.

What does it mean when your windshield wipers won’t turn off?

Faulty park switch

: Inside the wiper motor is a park switch. … Bad wiring: A loose wire or bad connection could also cause your windshield wipers to continue to run even when they are turned off. A mechanic with the proper diagnostic tools can easily check the wiring and locate any issues.

Is it easy to change a windshield wiper motor?

The dash-mounted wiper switch is the easiest to replace

. … In some, it’s a friction clip that secures it to the dash. Locate and remove the wiring connector from the back of the switch.

How do you fix windshield wipers that stopped working?

One of the most common reasons for poor wiper performance is the

presence of ice or snow on the windshield

. While windshield wipers are capable of removing light snow and ice, they are not designed to clear away heavy snowfall or ice frozen onto the windshield.

How do you remove a windshield wiper motor?

1. Remove the wiper blades using a windshield wiper removal tool.
2. Locate the windshield wiper motor. …
3. Remove clips/ screws that are holding the cowl in place.
4. Unplug and unbolt the old motor.
5. Remove the old motor from the vehicle.

How do you reset a windshield wiper motor?

Use a socket wrench

to remove the nut located at the center of the wiper motor. This nut connects the arm linkage to the motor. Turn the wipers on, then back off, so the motor completes a full cycle and returns to the correct park position. The blades will not move since the linkage has been disconnected.

What causes windshield wiper motor failure?

If your windshield wipers are moving slower than normal

, then you may have dirt or other debris stuck somewhere. This can cause the windshield wiper motor to move slowly, and even work harder than it has to. All this work will eventually cause the motor to give out.

How do you check wiper motor wiring?

1. Wiper Blades Start Moving Slower.
2. Wiper Blades Only Move at One Speed.
3. Wiper Blades Stop Moving Completely.
4. Wiper Blades Refuse to Park in the Correct Position.
5. Humming Noises.