How To Remove Maintenance Light 2013 Rav 4? - Fixanswer

Put your key in the ignition. Turn the key to position one. …
Push the trip meter reset button on the dashboard. Hold it down for a second or two. …
Continue to hold the odometer button for around ten seconds. …
Once off, release the odometer button.

Contents hide

1 How do you turn off the maintenance required light on a 2013 Toyota RAV4 push button start?

2 How do you reset the maintenance light on a 2012 Toyota RAV4?

3 How do you turn off the maintenance required light on a 2014 Toyota RAV4?

4 How do you turn off the maintenance required light on a 2015 Toyota RAV4?

5 How do you turn off the maintenance required light on a Toyota RAV4 push button?

6 How do you reset the maintenance required light on a Toyota RAV4?

7 How do you reset the maintenance required light on a 2010 Toyota RAV4?

8 How do you turn off the maintenance required light on a Toyota push start?

9 What does it mean when my Toyota RAV4 says maintenance required?

10 How do I turn off the maintenance light?

11 How do I turn off maintenance required light?

12 How do you turn off the maintenance required light on a 2010 Toyota RAV4 push button?

13 How do you reset the maintenance light on a Toyota Rav 4 2017?

How do you turn off the maintenance required light on a 2013 Toyota RAV4 push button start?

How do you reset the maintenance light on a 2012 Toyota RAV4?

How do you turn off the maintenance required light on a 2014 Toyota RAV4?

How do you turn off the maintenance required light on a 2015 Toyota RAV4?

To reset the maintenance light on a 2015 toyota rav4, first turn the ignition to on, then set the odometer to read “odo”. Turn ignition to off. Push and hold the trip reset button at the same time turning the ignition back to on.

How do you turn off the maintenance required light on a Toyota RAV4 push button?

Press And Hold ODO TRIP BUTTON/DISP BUTTON And Turn Ignition To The “RUN” Position. Hold ODO TRIP BUTTON/DISP BUTTON For At Least 5 Seconds Until “MAINT REQD” Flashes Multiple Times And The Light Goes Off.

How do you reset the maintenance required light on a Toyota RAV4?

Insert the key into the ignition.
Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.

How do you reset the maintenance required light on a 2010 Toyota RAV4?

How do you turn off the maintenance required light on a Toyota push start?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash

. You might even hear beeping noises. The light should go out.

What does it mean when my Toyota RAV4 says maintenance required?

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that

the vehicle’s scheduled maintenance is due

. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

How do I turn off the maintenance light?

How do I turn off maintenance required light?

Turn the vehicle off.

Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once

. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.

How do you turn off the maintenance required light on a 2010 Toyota RAV4 push button?

How do you reset the maintenance light on a Toyota Rav 4 2017?