Alternator Supplied Amperage 50 A | Hydraulic System Fluid Capacity 49.7 gal (188 l) | Hydraulic System Relief Valve Pressure 4980 psi | Operating Voltage 24 V | Operating Weight 34800 lbs (15,785 kg) |
---|
How much does a CAT 312 excavator weight?
Maximum Operating Weight 33080 lbs (15,005 kg) | Minimum Operating Weight 29770 lbs (13,504 kg) | Operating Weight 33080 lbs (15,005 kg) |
---|
How much does a 320 CAT excavator weight?
Maximum Operating Weight 54450 lbs (24,698 kg) | Minimum Operating Weight 47400 lbs (21,501 kg) | Operating Weight 54450 lbs (24,698 kg) |
---|
How big is a 315 CAT excavator?
Boom Reach 4.65 m (15’3′′) Reach 4.65 m (15’3′′) | Track Length 12.3 ft 3750 mm | Length to Center of Rollers 9.9 ft 3040 mm | Track Gauge 6.5 ft 1990 mm | Transport Width 8.1 ft 2490 mm |
---|
How many tons is a Cat 315?
The new Cat 315 is the most productive Cat excavator in the
15-ton
size class.
How deep will a Cat 320 dig?
Maximum Digging Depth 22.1 ft 6720 mm | Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 21.5 ft 6550 mm | Maximum Vertical Wall Digging Depth 17 ft 5190 mm | Bucket Digging Force – ISO 38811 lbf 150 kN | Stick Digging Force – ISO 23911 lbf 106 kN |
---|
How much can a 330 excavator lift?
At this starting point, the machine has
34,210 pounds
of lift capacity, so the 3,600-pound pipe on the hook isn’t much of a challenge. But, as you ease the load 5 feet off the ground, thus raising the bucket’s lift point to 10 feet, capacity diminishes to 29,630 pounds.
How much horsepower does a CAT 3126 have?
This electronically controlled in-line diesel has a 7.2 liter displacement, outputting
300 horsepower at 2,200 RPM
. Caterpillar also produces a high output version of the engine that produces 330 horsepower for recreational vehicles, emergency vehicles and fire trucks.
How much does a 318 CAT excavator weight?
Alternator Supplied Amperage 50 A | Hydraulic System Relief Valve Pressure 4980 psi | Operating Voltage 24 V | Operating Weight 43320 lbs (19,650 kg) | Swing Drive Fluid Capacity 2.1 gal (8 l) |
---|
How wide is a Cat 308 excavator?
Dig Depth 182.8 in 4643 mm | Maximum Reach – Ground Level 293.7 in 7460 mm | Boom In Reach 126.6 in 3215 mm | Swing Bearing – Height 29.7 in 756 mm | O/A Track Width 90.6 in 2300 mm |
---|
What is track gauge on excavator?
Track Gauge:
The centerline of one track to the other
. Maximum Tractive Effort: Indicates the maximum pulling force the lower can generate at stall conditions at the pressure indicated.
How much does a CAT 323 excavator weight?
Operating Weight – 790 mm (31′′) Shoes
25 500 kg 56,200 lb
• HD reach boom, R2. 9 m (9’6′′) HD stick, 1.38 m3 (1.81 yd3) HD bucket, 790 mm (31′′) triple grouser HD shoes, 5.4 mt (11,900 lb) counterweight. Operating Weight – 600 mm (24′′) Shoes 23 900 kg 52,700 lb • Reach boom, R2.
How much does a CAT 336 excavator weight?
The next-generation 336 Caterpillar excavator has an operating weight of
81,900 pounds
and maximum dig depth of 26 feet 9 inches with a 12-foot-10-inch stick. Integrated Cat Connect technology includes Cat Grade with 2D, Grade Assist, Cat payload, and a geo-fence.
What does l mean on Cat excavator?
If L is after series letter, example CAT320DL, L stands for
long truck excavator
.
How much fuel does an excavator use per hour?
Under a normal workload the excavator should use
approximately 12 gallons per hour
. Under medium load factor, its consumption increases to around 2.6 to 3.1 GPH and when the load is to its maximum, the fuel consumption is 3.1 to 3.8 GPH.
How much does a CAT 320 excavator cost?
Therefore this machine is a useful excavator to have around for most medium-sized construction jobs. Other models in this range weigh from 65,000 to 80,000lbs and have an engine power rating of 204 to 268hp. A new CAT 320 costs
between $230,000 to $270,000
.