To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker,
push this button in and hold it for 10 seconds
.
Why is my Maytag refrigerator not making ice?
To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker,
push this button in and hold it for 10 seconds
.
Press and hold the buttons for 8 to 10 seconds to reset the display
. The refrigerator display can be reset by pressing and holding the energy save and lighting button for 10 seconds.
How do I unlock my Maytag ice maker?
Press and hold TO LOCK for 3 seconds to lock the dispenser
. Press and hold TO LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked.
How do I force my ice maker to cycle?
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. …
- Press the ice maker toggle switch to the “On” setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
How do you troubleshoot a Maytag refrigerator?
- Adjust the temperature. …
- Check the settings. …
- Check if vents are obstructed. …
- Make sure the icemaker is turned on. …
- Check if the water line is kinked. …
- Make sure water shut-off valves are fully open. …
- Make sure the door is sealed properly. …
- Wipe down the door seal gasket.
How do I reprogram my Maytag refrigerator?
Press and hold the buttons for 8 to 10 seconds
to reset the display. The refrigerator display can be reset by pressing and holding the energy save and lighting button for 10 seconds.
How do I unlock my ice maker?
The test switch, also referred to as the reset button, is located,
in the front of the ice maker, underneath the Ice Tray Motor Housing, past the front cover
. Press and hold the button until you hear the Ice Tray Motor begin to torque, then release.
What causes a ice maker to stop working?
Cause: A common cause for a clog is
frozen water in the line
. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
Reset Temperature Issues
It is usually in
the middle of the back panel or at the top of the refrigerator in a panel above the upper shelf
. Make small changes in the temperature or you may run the risk of freezing the contents of the fridge.
How do I force my Whirlpool ice maker to cycle?
Look at the
center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out
. Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.
Why is my ice maker taking so long to make ice?
The top reasons for a slow ice maker inside of a freezer are
incorrect temperature setting
, too much or too little food inside, and a clogged water line or filter. If your ice maker is slow at making ice, try the solutions below. … Appliance
®
are standing by to repair your ice maker.
How do I reset my ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power,
press the feeler arm three times in succession
. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
How do I reset my Maytag plus refrigerator?
Press and hold the buttons for 8 to 10 seconds to reset the display
. The refrigerator display can be reset by pressing and holding the energy save and lighting button for 10 seconds.
Why would a refrigerator stop working?
Typical causes are: 1)
the door is left open frequently
, 2) the condenser coils need cleaning, 3) the door doesn’t seal against the refrigerator box, 4) the cold control is set too cold, or 5) something is blocking the flow of cold air inside the fridge.
How do I test my Maytag ice maker?
To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker,
push this button in and hold it for 10 seconds
.
