Jeep Wrangler U-Joint Replacement Cost Estimate. The average cost for a Jeep Wrangler u-joint replacement is
between $244 and $274
. Labor costs are estimated between $115 and $145 while parts are priced at $129.
How many U-joints does a Jeep Wrangler have?
There are
three u-joints up front and two in the rear
. A highly recommended upgrade is the Spicer 5-1310x which is sealed, as well as a stronger, more durable upgrade for the standard 1310 u-joint.
Can I drive my jeep with a bad u-joint?
When the U-joints fail completely,
you can no longer drive your vehicle
. … If it's necessary for you to drive for a while with bad U-joints, do not run on 4WD as doing so can rip apart the shafts or make them explode. The safest thing to do is to seek professional help once you notice any sign of failing U-joints.
How much does it cost to get U-joints replaced?
The average price for the u joint replacement cost ranges
between $190 and $260
for the replacement, while the labor on this job runs between $170 and $210 on aveage, with the parts ranging between $20 and $50. Keep in mind, the average u joint replacement cost will vary depending on the type of vehicle you have.
What does a bad u-joint sound like Jeep?
A bad u-joint can cause
a clunking sound or jerkiness
while driving, particularly when letting off of and pressing the accelerator. A bad u-joint can also cause vibration at certain speeds, emanating from the center or rear of the vehicle. If a u-joint is excessively worn, there's an easy test you can perform.
How far can I drive on a bad u-joint?
A car with a bad U-joint will break down
in a few hundred miles at the maximum
. But if you have a bad U-joint and you are having a transmission fluid leakage, you should not drive your car since the U-joint may break down anytime and will cause damage to the brake line, drive shaft, transmission line and other parts.
What happens when u-joint fails?
What Happens When a U-Joint Fails? When a u-joint fails,
your vehicle breaks down and stops moving
. … There may also be extensive damage to the underside of the vehicle and potentially to the driveline itself. The u-joint is a small part, but it can cause thousands of dollars in repairs if it completely fails.
How long should u-joints last?
In most cases, you have to grease your u-joints
every 5,000 miles or so
. When you fail to service your u-joints on a regular basis, they will fail. You don't have to worry about this problem with maintenance free u-joints. Misalignment: This happens when you change the vehicle's ride height.
How long should it take to replace U-joints?
On a typical labor book, a U-joint replacement is
one or two labor hours
, meaning that a $25 part can cost substantially more once someone else installs it for you and charges around $100/hour.
Where are U-joints located?
U-joints are found on
each of the ends of the rear drive shaft
, whereas CV-joints are found on front wheel drive cars. Each allows the drive shaft to rotate as the differential moves in relation to the rest of drive train mounted on the chassis.
How do you tell if u-joint is bad?
- Squeaking noise when starting to move (forward or reverse) …
- “Clunk” with a ringing sound when shifting from Drive to Reverse. …
- Vibration felt throughout the vehicle while moving forward at speed. …
- Transmission fluid leaks from the rear of the transmission.
What noise does a bad drive shaft make?
Generally speaking, a bad drive shaft is going to create a kind of
rattling or clunking sound
. You may also hear sounds that are like a high-pitched squeaking or a scraping noise of metal on metal. All of this will originate from underneath your car, rather than in the engine compartment.
Can a bad U-joint cause the death wobble?
The biggest issue with death wobble is that it can have so many more causes than say, a
driveline vibration
, which can typically be narrowed down to a bent driveline, improper angle, or worn u-joint. … This accelerated wear can lead to even more death wobble and a longer repair list.
Are U joints hard to replace?
Replacing these joints is a
fairly straightforward
job, though it takes some prior experience. To begin, you'll need a universal joint pressing tool. You can also take advantage of the loaner tools program at your local Advance Auto Parts store. Then follow these step-by-step instructions on how to change U joints.
Can a bad u-joint damage transmission?
The vibrations caused by a bad u-joint cause the driveshaft's stub shaft to rotate out of round. This causes the transmission's rear seal to fail. Fluid will leak out of the transmission.
If the fluid gets low enough, the transmission will be damaged
.
How long can you drive with a bad drive shaft?
If you allow the driveshaft to die completely, then it will reach the point where the wheels no longer receive any power. While there is no set lifespan of a driveshaft, it typically can
last about 75,000 miles
. Keep in mind depending on the vehicle, and wear and tear you may get much less or much more.
