How Do You Reset The Change Oil Light On A 2000 Pontiac Grand Am?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the change oil light on a Pontiac Grand Am?

Turn the ignition to ON, with the engine off. Fully press and release the accelerator pedal slowly 3 times within 5 seconds. The reset is

complete when you hear the chimes and the CHANGE OIL light goes out

.

How do you reset the change oil light on a 1999 Pontiac Grand Am?

To reset the Change Oil light,

open the driverâ€TMs side instrument fuse panel cover and turn ignition on engine OFF

. Press the RESET button and release. The change oil indicator light will flash. Press the button again and the system will be reset.

Where is the reset button for oil change light?

1. Turn the car’s systems on, but leave the engine off. …
2. Locate the “Reset” button or stick, which is typically located on the dashboard, near the speedometer and fuel gauge.

How do you reset the change oil light on a 2003 Pontiac Grand Am?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the change oil light on a 2001 Pontiac Grand Am?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the service vehicle soon light on a 2001 Pontiac Grand Am?

1. Turn the ignition switch on without starting the engine.
2. Press the “Options” button on the instrument panel until the service light is displayed.
3. Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.

How do I reset my change oil light?

1. Press and hold the reset button.
2. Turn the ignition back to the ON position while holding the reset button.
3. Watch the oil change or maintenance light carefully. …
4. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do I reset dashboard after oil change?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the

gas pedal slowly to the floor three successive times within 10 seconds

. Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.

Why is my change oil light still on?

If your oil light stays on even after changing your engine oil, you’re going to want to

check the sensor first to rule out a malfunctioning sensor as the cause

. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

How do you reset the change oil light on a 2004 Pontiac Grand Am?

Turn the ignition to ON, with the engine off. Fully press and release the accelerator pedal slowly 3 times within 5 seconds. The reset is

complete when you hear the chimes and the CHANGE OIL light goes out

. However, if the light stays on and no chime is heard, you will need to repeat the reset procedure.

How do you reset the change oil light on a 2005 Pontiac Grand Am?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the oil life on a Pontiac G6?

1. 1-Turn the ignition to RUN (second position)
2. 2-Press the INFO button to scroll until the Oil Life displays.
3. 3-Press the MENU and ENTER (arrow) buttons at the same time to display OIL LIFE RESET.
4. 4-Press and hold the ENTER (arrow) button until the cluster shows AKNOWLEDGED.

How do you reset the change oil light on a 2002 Pontiac Grand Prix?

1. With the ignition key in RUN/ON, but the engine off.
2. Fully push and release the accelerator pedal slowly 3 times within 5 seconds.
3. If the CHANGE OIL SOON light flashes, the system is resetting.

How do you reset the check engine light on a Pontiac Grand Prix?

Insert key

in ignition and take key to full engine start position and hold there for at least 1 minute. (Of course, engine will not start and no instrument lights). Take key back to off, however, it will not remove at this time and be stuck. No problem.

Where is the oil filter on a 2004 Pontiac Grand Am?

Where is the oil filter located

? The

oil filter’s location

varies from car to car. It’s often accessible only from underneath, and may be shielded by the undertray which will need to be removed first. On some cars the

filter

can be accessed from above.