| Transmission: Chrysler 48RE | Max Input Torque: 560 – 570 lb-ft (Chrysler strength designation “8”) | Weight: ~248 lbs | ATF Type/Spec: ATF+4 automatic transmission fluid | Fluid Capacity: 14.5 – 16.5 dry fill capacity, approx 4 qts service refill capacity |
|---|
How many quarts of transmission fluid goes in a 400 transmission?
You can expect to use
between 11 and 12 quarts
of fluid in the stock version.
How many quarts of transmission fluid does it take to fill a 4 L 60 E?
The fluid capacity of the 4L60e is
12 quarts
of transmission fluid (dry).
What kind of transmission fluid does a 48RE take?
The 48re takes
ATF+4 transmission fluid
and has a 14.5 – 16.5 quart dry fill capacity. When dropping the transmission pan to perform a standard drain and fill transmission fluid change, you can expect to replace around anywhere from 5-7 quarts of fluid assuming the stock transmission pan is being used.
How many quarts does a 4 L 80 hold?
Mort. Amsoil claims the Initial fill on the 4L80E is 7.7 quarts and the Total fill is
14.0 quarts
. If you have the extra cooler it may be a little more. I am about to do mine but have not done it yet so I do not know for certain how much it will take.
How many quarts of transmission fluid does a 2004 Chevy Silverado take?
| Notes: This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer | Capacity: 4 speed 4L60-E Total Fill 11.2 quarts 5 quarts Initial Fill |
|---|
How many quarts of transmission fluid does a 2004 Chevy Tahoe take?
The 2004 Chevy tahoe transmission fluid capacity is
5 quarts
.
Is a 48RE a 4 speed?
The 48re is
a 4 speed
. The only thing you can do would be to put an over/under on it.
What temp should a 48RE run at?
In the pan in 90-110 is pretty normal, in the cooler ouput line
140-160
is normal, given your location and time of year.
What’s the difference between 47RE and 48RE?
47RE has a different color pump. Pump is unpainted on the 47RE, and
the 48RE have a black coating on them
IIRC. Also the 48RE has a plastic ring on the reaction shaft support.
How much fluid does an Allison 1000 hold?
When changing the fluid and spin-on filter* in an Allison 1000 equipped vehicle with a shallow pan you will need approximately 8 quarts of transmission fluid while changing the spin-on filter and fluid. An Allison 1000 with a deep pan will require
approximately 10 quarts
of fluid for a spin-on filter and fluid change.
How many quarts of transmission fluid does a 2003 Chevy Silverado 2500 HD take?
21.1 Quarts
is the transmission fluid capacity for the 2003 chevy 2500 hd.
How much fluid does a 727 transmission hold?
8 to 9-1/2 qts
.
How much transmission fluid does a 2003 Chevy Silverado take?
If You want to know what the transmission fluid capacity is on the 2003 Chevrolet Silverado 2500HD, then look no further. The
4 speed has a capacity of 13.5 US quarts
while the 5 speed has 12.7 US quarts.
How many quarts does a Chevy 5.3 take?
Capacity:
8 quarts
(with filter)After refill check oil level.
What kind of transmission fluid does a 2004 Chevy Silverado 1500 take?
The transmission fluid used on a 2004 chevy silverado is
carquest oil & fluids – dexron vi atf automatic transmission fluid
. The transmission fluid used on a 2004 chevy silverado is carquest oil & fluids – dexron vi atf automatic transmission fluid.
