How Do You Reset The Oil Life On A Chevy Tahoe?

Turn the ignition switch to the On position without starting the engine. Gently press the accelerator pedal all the way down to the floor three

times

within five seconds. The Oil Life should reset to 100%, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil life on a 2018 Tahoe?

First, without starting the vehicle, turn the ignition to the on position. Then, using the navigation button on your multi-information display, find the remaining oil life option. Once there,

press on your gas pedal three times

. Make sure to do so fully, pressing all the way to floor & do so within five seconds.

How do you reset the oil life on a 2016 Tahoe?

Turn the ignition switch to the On position without starting the engine. Gently press the accelerator pedal all the way down to the floor three times within five seconds. The Oil Life should reset to

100%

, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil life on a 2013 Chevy Tahoe?

1. Turn the ignition switch to the On position without starting the engine.
2. Gently press the accelerator pedal all the way down to the floor three times within five seconds.
3. The Oil Life should reset to 100%, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil light on a 2015 Tahoe?

Turn the ignition switch to the On position without starting the engine. Gently

press the accelerator pedal all the way down to the floor three times within five seconds

. The Oil Life should reset to 100%, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil life on a 2010 Chevy Tahoe?

1. Turn ignition switch to ON position with engine off.
2. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”
3. Press and hold the SET button until the display reads “100 percent”
4. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.

How do you reset the oil life on a 2012 Tahoe?

Turn the ignition switch to the On position without starting the engine. Gently press the accelerator pedal all the way down to the floor three times within five seconds. The Oil Life should reset to

100%

, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil life on a 2011 Tahoe?

1. Turn the ignition key to the “ON” position. …
2. Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds. …
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the oil life on a 2007 Chevy Tahoe?

1. Turn ignition switch to ON position with engine off.
2. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”
3. Press and hold the SET button until the display reads “100 percent”
4. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.

How do you reset the oil light on a 2015 Suburban?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the oil light on a 2017 Chevy Tahoe?

1. Turn on your car without starting the engine. We're not going to be starting the engine up. …
2. Go to the INFO menu. Then you have to be on the INFO menu. …
3. Scroll down to the OIL LIFE. …
4. Press and hold the ✓ button.

How do you reset the oil life on a 2010 GMC Yukon?

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How much oil does a 2011 Chevy Tahoe take?

Capacity:

6 quarts

(with filter)After refill check oil level.

How do you reset the oil life on a 2014 GMC Yukon?

It's pretty simple; once you've changed the oil,

just turn the car to the run position and then pump the gas pedal three times within five seconds

, and that will reset the system.

What kind of oil does a 2007 Chevy Tahoe use?