How Do You Open The Back Door On A Toyota Corolla?

by | Last updated on January 24, 2024

, , , ,

All you have to do is

pull the trunk release lever

, which is located at the left base of the driver’s seat. Pull the release up all the way, at which point the trunk will unlatch. You can then open your trunk fully by lifting it open.

How do you open the backseat of a Toyota Corolla?

  1. Remove all items from the backseat of the Toyota Corolla, including child safety seats.
  2. Open the trunk and locate a pull lever in the middle back of each backseat.
  3. Pull each lever one at a time to disengage the locking mechanism for the back of the seat.

How do you open the trunk on a 2010 Toyota Corolla?


Look for the safety lever or tag

before you try entering the car through the rear seats. Many newer cars have this lever. It glows in the dark and is usually bright yellow or orange, and it is situated near the trunk lock mechanism. Pulling this lever or tag releases the lock latch and opens the trunk lid.

How do you open the trunk on a 2007 Toyota Corolla?

Activate the trunk open feature in

the front seat

if the car is unlocked. Most car models have a button or lever on the dashboard or in the front seat area that opens the trunk.

How do you open the trunk back without a key?

  1. Slide the hook end of the slimjim between the the passenger side window and window trim at the bottom of the window near the door handle. …
  2. Feel around with the slimjim for the lock rod. …
  3. Pull up on the lock rod with the slimjim. …
  4. Open the door and climb into the driver’s seat.

What do you do if your trunk doesn’t open?

In most cases, that means

the lock is broken or that there is some inherent fault

that does not allow it to operate the way it was intended. This could be because the trunk latch, trunk lock, or other internal mechanisms responsible for the smooth operation of the lock, have now gone awry.

How do you open the trunk of a Toyota Camry without a key?

You might not know this, but some generations of Toyota Camry come with a trunk latch located near the driver’s seat, either on the floor next to the gas tank latch or on the bottom left side of the dashboard. It allows you to quickly and easily open the trunk of your Camry from inside the vehicle.

How do I manually open my trunk?

  1. Slide the hook end of the slimjim between the the passenger side window and window trim at the bottom of the window near the door handle. …
  2. Feel around with the slimjim for the lock rod. …
  3. Pull up on the lock rod with the slimjim. …
  4. Open the door and climb into the driver’s seat.

Why is my trunk not closing?

One of the most common reasons why a trunk won’t close is

because the latch or striker gets misaligned which is common after an accident

. If your trunk doesn’t close, examine the latch and the hinge where it connects to the car’s body.

Can you open a car trunk from the inside?

As a safety feature,

your vehicle has a release lever on the right corner in the trunk

so the trunk can be opened from the inside. To open the trunk, push the release lever to the left. Parents should decide if their children should be shown how to use this feature.

How do I unlock my car door without a key?

  1. Method #1: Use a tennis ball.
  2. Method #2: Use your shoelace.
  3. Method #3: Use a coat hanger.
  4. Method #4: Use a rod and a screwdriver.
  5. Method #5: Use a spatula.
  6. Method #6: Use an inflatable wedge.
  7. Method #7: Use a strip of plastic.

Why is my automatic trunk not opening?

Another common signal that a problem with the trunk lock actuator exists is when you press the fob button or the inside trunk release and

nothing happens

. This might indicate a problem with the electronics running to the actuator such as a fuse or wire being shorted or an issue with the vehicle’s battery.

Can’t open car door from inside or outside?


Lubricating the door latch

is one of the ways in which doors that won’t open from the inside or the outside can be fixed. Begin by checking the keyway for blockage. Next, open the door and try to adjust the lock assembly to see what is stuck. Lubricate the assembly and move again.

How much does it cost to fix a trunk lock?

Trunk Lock Cylinder Replacement Cost – This Low-Priced Fix Is Quick and Easy! The average price for the trunk lock cylinder replacement cost is

between $158 and $169

for most makes, models, and years of cars on the road today.

How do you pick a trunk lock?

  1. Slide the hook end of the slimjim between the the passenger side window and window trim at the bottom of the window near the door handle. …
  2. Feel around with the slimjim for the lock rod. …
  3. Pull up on the lock rod with the slimjim. …
  4. Open the door and climb into the driver’s seat.
David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.