Youtube How To Ride Derailier Bikes?

by | Last updated on January 24, 2024

, , , ,

If the chain is on the smallest sprockets in the front and back, the derailleur has more slack to deal with.

The rear derailleur switches gears by moving the bottom of the chain from side to side

. When you pedal the bike, the top of the chain is in tension — the force of your legs pedaling pulls it tight.

How do bike derailleurs work?

On mechanical-type derailleurs, a cable is secured at a pinch bolt. The cable is pulled to move the cage inward. A return spring in the linkage will move the derailleur the opposite direction when the cable is released. Electrical systems use an electrical signal to trigger a motor to move the linkage.

How does a bicycle gear shifter work?

How do you adjust the gears on a 10 speed bike?

Where is the derailleur on a bike?

How do I know what derailleur I need?

Why is my derailleur clicking?

If you hear a constant clicking (especially in certain gears), it could mean that

your shifter cables have stretched enough to pull your derailleur out of alignment

, causing your chain to ride between gears or rub on the derailleur cage. First, make sure your derailleur is aligned and that the hanger isn’t bent.

Why is my derailleur hitting my spokes?

Often, the derailleur hits the spokes

when its hanger is bent following a heavy hit

. If that’s not the case, it could be due to wobbly spokes, misadjusted limit screws, or incorrect cable tension.

How do you install a Shimano derailleur?

Do you shift gears while pedaling?


You still have to be pedaling while you shift gears

, but don’t be pedaling hard as you change them. Lightening the pressure on the pedals facilitates a much smoother, more quiet shift. This technique too is easier on your bike. Fourth, remember to shift into a low numbered gear before you stop.

What gear should I bike in on flat road?

For riding on flat roads, it is recommended to use the

middle gear

. It is a common choice among bikers as it helps you reduce pressure from your feet onto the pedals.

What gear do you use to go uphill?

Uphill: Approach uphill situations with an appropriate amount of momentum,

a higher gear (3rd in an automatic transmission) and less throttle

to reduce torque, which also reduces wheel spin. The last thing you want to do is get halfway up the hill, lose traction and begin to spin your wheels.

How do you adjust a derailleur?

Do you adjust front or rear derailleur?

In a nutshell,

adjust the front derailleur first, then the rear

. Show activity on this post. If the derailers just need minor tweaking (they are basically in adjustment but are “not quite right”) then you adjust the one that is obviously wrong, check the overall adjustment again, then again adjust what needs adjusting.

How do you shift derailleur gears?

Can you put any derailleur on a bike?

Shimano derailleur compatibility

This means that

you can use an 8 -or 9-speed mountain bike derailleur with road shifters or vice versa

. The only exception is pre-1997 9-speed Dura-Ace gearing, which won’t play nicely with anything because it uses a totally different cable pull ratio.

Do all bikes have derailleurs?


Most modern bikes are equipped with a derailleur gearing system

– stay with me, we’ll get to the terminology – where the chain runs between many different cogs.

How much does a derailleur cost?


If you take your MTB into a local bike shop the average price to replace a rear derailleur is going to be $110

. If you DIY replacing a derailleur will cost about $50 (plus your time) This price will depend a lot on the actual derailleur needed. Usually a bike shop will also take care of other problems.

Is my derailleur SS or GS?

The difference between SS and GS is technically as follows. To make it easy to remember,

SS (short cage) is compatible with cross ratio road sprockets, while GS (medium cage) is compatible with wide ratio sprockets

. Cross ratios, wide ratios, the world of gear ratios is a deep one.

How do you install a derailleur extender?

Do I need a short or medium cage derailleur?


It’s generally best to go for as short a derailleur cage as you can get away with

, as long as you can avoid the chain contorting on the extremes of the cassette, such as using the largest on both sprocket and chainring. Smaller cages tend to have snappier gear changes, they’re lighter, and also less exposed to damage.

Why does my bike creak when I pedal hard?

The most common cause of creaking is the

crank being loose on the spindle

. Remove the crank bolts, lubricate the threads and under the bolt head, and reinstall. Tighten the bolts to the manufacturer recommended torque. Use a torque wrench if possible.

Can I use wd40 on bike chain?


WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free

. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.

Why does my bike click when I pedal hard?

A clicking noise is the most common sound your bike can make.

It can be due to the rider pedaling fast, and the chain wants to jump up and down the rear cassette to accommodate the demands of the pedal

. To identify the sound, you can slow down from pedaling and observe whether you still hear a sound.

How do I stop my rear derailleur from hitting spokes?

What do the screws do on a rear derailleur?

Derailleurs are fitted with limit screws that

stop the derailleur from moving too far inward or too far outward

. If you look closely as the derailleur moves, you can see the limit screws stopping the derailleur at each end of it’s travel.

How do you know if you have a bent derailleur hanger?

Jasmine Sibley
Author
Jasmine Sibley
Jasmine is a DIY enthusiast with a passion for crafting and design. She has written several blog posts on crafting and has been featured in various DIY websites. Jasmine's expertise in sewing, knitting, and woodworking will help you create beautiful and unique projects.