Broken white lines
separate traffic lanes on one-way streets. You will not see yellow markings on a one-way street. When driving on one-way streets with multi-lanes, always choose the lane with fewest hazards.
What line is used to mark the edge of a road?
A solid white line marks
the right edge of many roads. The center marking for roads with four lanes consists of TWO SOLID YELLOW LINES. The yellow lines tell you the traffic on the other side of the lines is moving in the opposite direction.
What lines separate one way traffic or outline the edge of roads?
Edge lines
are used to outline and separate the outside edge of the pavement from the shoulder. Right edge lines are marked with a solid white line and left edge lines are marked with a solid yellow line.
What color lines separate traffic?
Yellow lines
are used in the center of the road to separate lanes of traffic moving in opposite directions.
What color are the lines that separate the lanes on a one-way road?
Solid white lines
mark traffic lanes going in the same direction, such as one-way streets.
What is the most important and safest thing a driver should do just before driving away?
What is the most important and safest thing a driver can do before driving away?
Put on a safety belt and turn off electronics
. Illegal in Maryland if the vehicle is unattended and is not necessary. Check all mirrors, complete head checks, and use back up cameras if available.
Can you turn right on double white lines?
Except where ‘Double white’ lines are used to separate traffic travelling in the same direction,
you may cross ‘Double white’ lines
to make a right-turn into or out of any road, premises or place adjacent to the carriageway. You should not stop – not even if the broken line is on your side.
What are left edge lines on divided highways?
Left edge lines are generally used on one-way streets, divided highways, or on ramps. Left edge lines
shall be yellow in color
. Edge lines are required on all freeways and interstate highways, paved rural arterials with a travel width of 20 feet or more and an ADT of 6,000 vehicles per day or greater.
What does it indicate if an edge line angles in towards the center of the road?
A solid line along the side of the road indicates where its edge is, marking the boundary between the travel lane and the shoulder. If the edge line angles toward the center of the road, this means that
the road is narrower ahead
.
What is the white line on the right side of the road called?
The solid white line on the right side is called
the ‘fog line’
used to help cars stay in their lane during foggy conditions and help pedestrians stay off the road. Marked crosswalks are indicated at a minimum by a pair of white lines.
Can I turn left on a double yellow line?
It’s okay to cross a double yellow line to turn left
. YOU CANNOT cross a double yellow line to pass another vehicle.
What is double lane rule?
Driving in the Cities:
As a general rule as you
move to the right side of the road, the speed you should be maintaining increases
. So the leftmost side of the road is only for slow moving traffic. In the cities, you are mostly going to witness 2-lane roads.
What are the four steps to successful passing?
- Scan for hazards, e.g., oncoming vehicles, vehicles approaching from rear, merging vehicles;
- Check for blind spots;
- Signal your intention and accelerate into passing lane;
- Accelerate quickly to an appropriate speed;
- Concentrate on the path ahead;
- Check the mirror for following cars.
Can you turn into a driveway over double lines?
If there are two lanes and there is a double yellow line separating those lanes,
you cannot cross them
– even if that is to turn into your own driveway. You can cross, however, if there is a gap in the double yellow lines that permits your left hand turn.
What does a solid white line at the side of the road?
Explanation: The continuous white line
shows the edge of the carriageway
. It can be especially useful when visibility is restricted, such as at night or in bad weather. It’s discontinued in some places; for example, at junctions, lay-bys, entrances or other openings.
What does the white line at the side of the road indicate?
Explanation: A continuous white line is used on many roads to indicate
the edge of the carriageway
. This can be useful when visibility is restricted. The line is discontinued at junctions, lay-bys, and entrances to or exits from private drives.
