Active Line Out Converters
These require
12v power to output a signal
. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.
How do you hook up a line output converter?
Active Line Out Converters
These require
12v power to output a signal
. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.
Does a Line Output Converter need power?
These require
12v power to output a signal
. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.
What is the yellow wire on a line out converter?
* Yellow will get
a 12 volt constant power
. Wire this into the power wire you have feeding your amp and fuse it seperately with a 5 amp fuse. * Blue black connects to chassis ground. If possible use the same ground as the amp to prevent ground loops.
How do you know if your amp is fried?
- There is a noticeable distortion in the sound.
- There is no sound even if you have already turned on your audio system.
- Your stereo system starts making bizarre sounds such as farting sounds.
How do you know if an amp is bad ground?
- Overheating. …
- Clipped Sound Signal. …
- Unable to turn on. …
- Restarting all the time. …
- Whining noise. …
- Fire/Burning.
What is a Line Output Converter for?
A: A line output converter, or LOC for short,
converts a speaker-level output signal into an RCA preamp-level signal
. This lets you connect the radio to the amplifier. It can also be used to connect a new radio to a car’s factory amp (see below).
What does a hi low converter do?
The adapter converts high-level signal from the radio’s speaker line and
transforms it into a safer low-level audio signal
. This allows you to add a 2-channel amplifier to your system for higher power output and better sound quality.
What is a line output?
Updated: 08/02/2020 by Computer Hope. Alternatively referred to as audio out and sound out, the line out jack is found on computer sound cards. It
allows external speakers, headphones, or other output devices to connect to the computer, transferring computer generated audio to the devices so that it can be heard
.
How do I know if my amp works?
One of the quickest ways is to simply
touch the power wire from the amp to the positive post of the battery
and the ground wire to the negative battery post. If the power light comes on, it can be ascertained that the amplifier has a good circuit board.
Why is my amp in protect mode?
Some amps go into protect mode
if they get too hot
, which can prevent a permanent failure. The common cause of overheating is a lack of airflow. If the amp is located underneath the seats, or in another confined space, that may cause it to overheat.
Will amp turn on if not grounded?
a bad ground (or no ground) would prevent an amplifier from turning on
. not connecting a 12v+ remote turn on wire, would too, prevent an amplifier from turning on. a blown fuse from a spark will prevent an amplifier from turning on. just a personal note: take off the ground (from the battery) first before installation.
What happens if my amp has a bad ground?
Bad grounds
can make your amp cut out, and create excessive heat
, which can lead to vehicular fires. … Without a good ground, your system cannot create this current, which creates clipping issues with the amplifier. Properly grounded systems help stabilize voltage levels.
What happens if speaker wires touch?
What Happens If Speaker Wires Touch. A Speaker wire is basically like any other wire out there. … Therefore, when speaker wires touch, this results in
shorting out of the amplifier
. This causes the side of the amplifier (channel) where the speaker wire is connected to die out.
What is a speaker level input?
Speaker level inputs are
used when you want to connect an amplifier to your factory radio
or an aftermarket radio that does not have low-level (RCA) inputs. It allows you to use the signal coming from the speaker outputs as an input source for the amplifier.
