Throat capacity is
the distance between the blade and the column
. This measurement is also a quick reference to the size designation for a bandsaw. In other words, a 14′′ Bandsaw should have close to 14′′ of cutting capacity between the blade and the column.
How is a band saw measured?
To determine the size of a band saw,
measure the distance from the blade to the throat
. That measurement is a little more than the largest piece of wood the band saw can handle. The band saw’s large circular blade is placed around the tool’s top and bottom wheels. Some band saws have built-in fences.
How thick can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle
six-inch cuts
.
What is a band saw made of?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a
continuous band of toothed metal
stretched between two or more wheels to cut material.
How big is a band saw?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with
14′′ as
the minimum for a bandsaw, though 16′′ is better. Those doing larger work might even want 18′′ or 20′′ machines. Just make sure you have a minimum resaw height of 12′′ for versatility.
What size blade does a 12 bandsaw take?
The Craftsman 12′′ Bandsaw-Sander takes an
80′′ blade
or an 80′′, 1/2′′ wide sanding belt.
Why are bandsaws so big?
Rob Johnstone: Band saw
sizes are derived from the diameter of the wheels in the saw
. So a 14-inch band saw will have wheels that are 14-inches in diameter.
Is a band saw worth it?
That being said, a quality band saw will do a lot more than just cut curves. They are great
for cutting tenons
and some smaller rabbets, for ripping small pieces of stock, and for resawing thin strips from larger pieces of wood.
Can a band saw cut a 4×4?
Band Saw – A decent sized band saw is a pretty good tool to cut a 4×4. You
can cross cut, miter and rip
pretty easily. Doing any type of grooves or dados along a long 4×4 is pretty tricky. A router or table saw work better for those.
What is the difference between a table saw and a band saw?
One of the main differences between a table saw, and a band saw is
that a table saw is going to be more dangerous to use
. With a band saw, the blade cuts downward and pulls the wood into the table. … A table saw is not going to be able to allow you to create curves or intricate work because it uses a fixed, round blade.
Why is a band saw called a band saw?
The bandsaw, although widely considered French in origin, was
invented by the Englishman, William Newberry
. In 1808, Newberry patented “a machine for sawing wood, in which an endless band or ribbon saw, strung over two wheels, was used”. (Newberry also claimed that it could be used for splitting skins, etc.
Why is a band saw called a bandsaw?
Why is it called a band saw? It is called a bandsaw
because the blade runs continuously between two wheels, like a band or a ribbon
. Some bandsaws may have three wheels, but the principle is the same.
What can you use a band saw for?
A band saw can be used
to cut curves
, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
What speed should a bandsaw run at?
Bandsaw: Speeds. A common speed for the bandsaw is
about one thousand feet per minute
. Wood can effectively be cut at much higher speeds, up to and over five thousand feet per minute, but you should keep it slower because it’s safer.
How much horsepower does a bandsaw need?
With general cutting of thinner stock with minor resawing, typically a
1-1/2 horsepower motor
will do the trick. If you plan on making your own veneer by resawing larger exotic hardwood or cutting bowl blanks from a log, consider looking at units with a 2-1/2 to 3 horsepower motor.
How do you use a band saw safely?
- Wear safety glasses or goggles, or a face shield (with safety glasses or goggles).
- Wear hearing protection that is suitable for the level and frequency of the noise you are exposed to in the woodworking area.
- Wear protective footwear when required.
