It
will fit no problem
. The 318 is an internally balanced engine verses the 360 being an external balanced engine. Both engines will have a 727 Torque Flight transmission.
Is a Dodge 318 and 360 the same block?
Nope, not the same
. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
What's the difference between a 318 and a 360?
360 is externally balanced while the 318 is internally balanced (might have that backwards).
42 cubic inches difference
. Bore and stroke are bigger on the 360.
What transmission goes with a Dodge 360?
Monster Powertrain Package – 360 Dodge 5.9L Engine – Rated at 290Hp / 385tq with
TF8/727 Transmission
.
What engine is better 318 or 360?
There's no replacement for displacement
. All else being equal, a 360 being 13% larger will produce 13% more torque/power. In actual practice, a 360 will produce this and more over a 318.
What is the difference between a 318 and 340?
318`s were really not built around performance, most are lo-po 2 barrel engines while 340`s (
68-71
) came with 10.5 to 1 compression, windage trays, forged steel cranks, double roller timing chains, 2.02 intake valves, 3/4 cams, HD valve springs, and dual plane intakes.
How much HP can a 318 handle?
It can easily make
400 plus horsepower
and still has great street manners. If you're building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.
How can I get more power out of my 318?
The only way to do it right it a good set of aftermarket heads or super expensive
340 heads
, and a quality cam and lifetrs, headers, carb, intake and so on and so on. IF you just want to make BETTER power than a tired *** old 318 has, that's easy.
Are 5.2 and 5.9 heads the same?
nope
. post 1994 magnum cylinder heads are the same on 5.2/5.9 engines.
How much horsepower does a 360 engine have?
The 360 featured an 8.7:1 compression ration and
255 horsepower at 4,400 rpm
. Its torque was 360 ft. -lbs. at 2,400 rpm.
Are all 46RE transmissions the same?
All 46Re's are not the same
. Basically, the short form is that '96-99 Dakota and Durango interchange.
How do I identify my Dodge transmission?
Transmission identification numbers are
stamped on the driver side of the case flange just above the oil pan gasket
(just below the TV lever). There will be a 9 digit part number, a space, a 4 digit build date, a space, and a 4 digit serial number.
What vehicles have a 46RE transmission?
- Dodge Ram pickup and vans 150/250/350 V8 and diesel engines (DGT)
- Dodge Ramcharger SUV 1988-1993 5.2L & 5.9L V8.
- Jeep Grand Cherokee 1993 5.2L, 1998 5.9L.
- 1995 Dodge Dakota 5.2L Magnum V8.
- 1996 Dodge Dakota V8.
- 1998–2003 Dodge Dakota R/T.
- 1998-2003 Dodge Durango 5.9L V8 (4WD or 2WD)
Is a 318 a good engine?
The Good And The BadIn terms of durability, the
Mopar 318 is robust
. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.
How do you turn a 318 into a 340?
to achieve 340 cubics with a 318 you will need
a stroker crank
. yep, to get up to 340 with a 318 you'll need a stroker kit. around 1500$ or more for a kit with everything you need, including the crank, bearings, pistons, rings, and connecting rods. Get a 360!
How much HP does a 318 v8 have?
The 318 four-barrel, used on police pursuit and other cars, produed
165 hp
and 240 lb-ft of torque.
