What size socket fits the axle nut? This
36mm
axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
What size is the axle nut on a 2006 Pontiac Grand Prix?
36mm
, if you’re replacing the wheel bearing you need to clean the axle threads, lube them and torque a NEW nut to spec. torque.
What are the most common axle nut sizes?
| Item No. Description Weight | 30410 3.25′′ 8 pt. Axle Nut Socket 2.7 lbs (1.2 kg) | 30411 3.5′′ 6 pt. Axle Nut Socket 2.95 lbs (1.3 kg) | 30412 3.75′′ 8 pt. Axle Nut Socket 3.15 lbs (1.4 kg) | 30413 4′′ 6 pt. Axle Nut Socket 3.35 lbs (1.5 kg) |
|---|
What size socket do I need to take off a wheel bearing?
It’s a
4 MM
!
What happens if you over tighten axle nut?
It’s
possible to damage the wheel, rotor, and hub assembly
. The wheel can come off if over-torquing the nuts/bolts is done.
What size is the axle nut on a 2002 Grand Prix?
36mm
on my ’02 GT. #13 Re: Axle Nut Size? Beleive its actually 34mm, but most people including myself, have gotten away with using 36mm.
What size is the axle nut on a 2005 Pontiac Grand Prix?
Dorman – Autograde – Flanged Hex Spindle Nut M27-
2.0 Hex Size 34mm
(sold by each) (Part No. 615-144)
What size socket do I need for axle nut?
A Must Have for Front End Work
This
36mm
axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
What is the most common spindle nut?
There are several manufacturers offering one-piece spindle nut systems. The two most common are
the Axilok® nut by Metform
(see Figure 1) and the PRO- TORQ® nut by Stemco (see Figure 2). Each of these systems has a specific installation procedure required by the manufacturer to set wheel bearing end-play.
What are wheel bearings?
A wheel bearing is
a crucial part of the wheel assembly that connects the wheel and the axle
. It is a set of steel balls (ball bearings) or tapers (tapered bearings), held together by a metal ring. It enables the wheel to rotate smoothly with a minimum of friction.
What size is the axle nut on a 2007 Chevy Silverado?
Dorman AutoGrade
2-16 Inch
Thread Axle/Spindle Nut.
How tight should I tighten an axle nut?
The nut on the spindle should be tightened
until snug
, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.
Do you have to replace axle nut?
I’m referring to the special nuts on major components like axle shafts and ball joints where a lost (or loosened) nut can cause accidents, even fatal accidents. … Whichever style is on your vehicle,
make sure you buy a new nut after removing the old one
. The old nut will not hold the proper torque a second time.
