Notice the large blind zone –areas around the vehicle you cannot see- and the overlap between the side and rear mirrors when using traditional mirror settings. Advantages to traditional mirror settings include:
better view when backing
.
What is traditional mirror setting?
Traditional mirror settings – When adjusting the mirror to this setting,
the side of the vehicle is visible in the mirror
. This setting limits driver's visibility to the sides of vehicle. Trunk release – An option on many vehicles to open the trunk from inside the vehicle.
What are the disadvantages of using the traditional mirror method of setting your mirrors?
What are the disadvantages of traditional mirror settings?
You will need to turn your head to look at blind spots
. What are the advantages of enhanced mirror settings?
What are the advantages of enhanced mirror settings?
With the side mirrors now angled outward slightly more, you'
ll gain increased visual coverage of your blind spots
. You should still perform a quick head check before changing lanes, but you'll now have almost seamless visual contact with all areas behind your vehicle.
What mirror setting method should you use?
Turn the mirror outward until you can just barely see the driver's side of your car. Then, with your head positioned from the center of the vehicle, turn the passenger's side mirror outward in the same way. This setting should only be used in a vehicle with a
rear view mirror
that provides an unobstructed view.
When Should traditional mirror setting be used?
Is appropriate for all vehicles in all situations.
After your seat is properly adjusted and you are seated
in an upright position, adjust the left side view mirror to see the left edge of the vehicle and adjust the right side view mirror to see the right edge of the vehicle.
What is the traditional way method of setting mirrors in your vehicle?
- Car One: The ‘traditional' way of setting the exterior mirrors. …
- These settings prevent any other vehicles, including motorcycles, from coming up behind, unseen.
- Car Two: Setting the exterior mirrors ‘wide'.
How many seconds should you signal before turning?
Signal for at least 100 feet before you turn left or right. Signal for at least
5 seconds
before changing lanes on the freeway or highway.
What are enhanced mirror settings quizlet?
Enhanced mirror settings. When adjusting the mirror to this setting
the driver will not see the left and right sides
of the vehicle when glancing at the outside mirros. You just studied 15 terms! 1/15.
What is the proper position to begin a right turn?
As you prepare to turn, reduce speed and stay as far to the right as possible.
Begin the turn in the lane nearest to the right-hand curb and end the turn in the lane nearest the right-hand curb
. Give turn signal. Yield to pedestrians who may be crossing your path.
What does IPDE mean?
IPDE stands for
Identify, Predict, Decide, and Execute
. This strategy also should be used in off-road driving. Identify any objects or conditions that may cause you trouble while driving. Predict what results might occur when you encounter the object or condition.
Does advanced mirror adjustment increases the size of your blind spot?
Advanced mirror adjustment
INCREASES
the size of your blindspot.
How often do you make decisions in city traffic?
| A B | SEEit is a space managment system | In city traffic, a driver often makes ____ decisions per mile. 50-60 | When you approach a school bus with flashing red lights from either direction, you all traffic should stop | It takes a train going 50 mph approximately___to stop safely. 1.5 miles |
|---|
What are the 3 levels of braking?
Coasting
– Level of braking in which releasing the accelerator stops the vehicle's forward propulsion. Controlled braking – Level of braking done with sufficient pressure to slow the vehicle. Engine acceleration – Releasing pressure from the brake pedal, allowing the low idle of the engine to move the vehicle forward.
What are the three main advantages of the BGE mirror setting?
- Enables you to see the vehicle in the lane next to you.
- Reduces the amount of blind spots to the side of vehicle.
- Eliminates the glare from the headlights of the vehicle behind you.
