How Ti Reset The Maintenance Req Light On Tacoma?

1. Press the “Power” button once without holding the brake to activate the electronics. …
2. Use the Left and Right arrows to select the “Gear” …
3. Use the Up and Down arrows to select “Settings“, then press .
4. Use the arrows to select “Maintenance Reset“, then press .
5. Select “Yes“, then press .

How do you reset the maintenance light on a Toyota Tacoma 2020?

Reset the maintenance light of the 2020 Toyota Tacoma by turning ‘on’ the key position and turning the key back off. Afterward, push and hold the reset button, while turning the key back to the ‘on’ position. Continue holding the reset button until all of the zeros clear and the odometer reading returns.

How do you reset the maintenance light on a 2017 Toyota Tacoma?

Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “MAINT REQD” flashes multiple times and the light goes off.

How do you turn off the maintenance required light on a Toyota Tacoma 2021?

1. Press the “Power” button once without holding the brake to activate the electronics. …
2. Use the Left and Right arrows to select the “Gear” …
3. Use the Up and Down arrows to select “Settings“, then press .
4. Use the arrows to select “Maintenance Reset“, then press .
5. Select “Yes“, then press .

How do I turn off the maintenance required light on my Toyota?

How do you reset the maintenance light on a 2015 Toyota Tacoma?

1. Put the key to the ON position but don’t start the car. …
2. Make sure your screen shows TRIP A. …
3. Turn the key off. …
4. Press and hold the ODO/TRIP button while turn on the ignition again. …
5. Keep holding the ODO/ TRIP button.

How do you reset the maintenance light on a 2018 Toyota Tacoma?

How do you reset the maintenance light on a 2014 Toyota Tacoma?

How do you reset the maintenance light on a 2013 Toyota Tacoma?

1. Turn the ignition to run (one position before starting engine).
2. Ensure trip meter A reading is shown. …
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds.

How do you reset the oil light on a 2014 Toyota Tacoma?

How do you reset the oil change light on a Toyota?

1. Put your key in the ignition and turn it to position one, the position just before starting the car.
2. Push and hold the trip meter reset button on the dashboard, then turn your key to position two.
3. Continue holding the odometer button for 10 seconds.