Working drawings help to represent components and communicate with end clients. Shop drawings, on the other hand, are used by
fabricators to know how the components will be manufactured and installed during the construction process
.
How does shop drawings differ from working drawings?
Design drawings are used in the early stage of design development as a means to communicate design ideas and proposals. In comparison, shop drawings
provide the details needed by a fabricator during fabrication, assembly, installation and erection
, such as the specified material, weld types and connections.
What do shop drawings include?
Ҥ 3.12. 1 Shop Drawings are
drawings, diagrams, schedules, and other data specially prepared for the Work by the Contractor or a Subcontractor, Sub-subcontractor, manufacturer, supplier
, or distributor to illustrate some portion of the Work.
What is working or workshop drawing?
Working drawings provide
dimensioned, graphical information
that can be used; by a contractor to construct the works, or by suppliers to fabricate components of the works or to assemble or install components. … Working drawings may include title blocks, dimensions, notation and symbols.
What are the three types of working drawings?
- 1 Architectural Drawings: This is one of the types of construction drawings. …
- Structural Drawings: …
- Electrical Drawings: …
- Plumbing and Sanitary Drawings: …
- Finishing Drawing:
What are the 6 types of construction drawings?
- Plans.
- Interior and exterior elevations.
- Building and wall sections.
- Interior and exterior details.
- Schedules and room finishes.
- Framing and utility plans.
Why do shop drawings?
The purpose of shop drawings is
to enable the design professional to secure graphic representation from the general contractor as to how the installing contractor intends to complete a portion of the work
, prior to proceeding, for which submittals are required.
Do shop drawings need to be stamped?
Shop drawings that are derived from seperate design drawings
need not be sealed and stamped by a design professional
. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
Do architects approved shop drawings?
Shop drawings are often specified for parts of a project which are included in the contract documents in design drawings or performance specifications and for which the architect has left the manufacture, fabrication or construction to the discretion of the contractor but for which the architect retains the right
of
…
Who prepares as built drawings?
As Built drawings are normally prepared by
the architects and engineers
who initially designed the project because they are conversant with the original specifications. This makes them the most logical choice to record the changes that took place during construction.
What are the qualities of a good working drawing?
- Contains all relevant title block information. …
- Uses standard symbology and nomenclature. …
- Identifies components and their capacities clearly. …
- Shows wireway sizes and lengths. …
- Shows conduit content. …
- Uses good aesthetics. …
- Makes proper use of notes. …
- Drawing packages.
What is drawing design?
Design drawings are
used to develop and communicate ideas about a developing design
: In the early stages (during the tender process) they might simply demonstrate to the client the ability of a particular design team to undertake the design. They may then be used to: Develop and communicating the brief.
What is as built drawings?
In construction projects, “as built” drawings are
used to track the many changes from the original building plans that take place during the construction of a building
. … Although some refer to these as “as builds,” the correct term is “as built” because they refer to the project as it was actually built.
What are different types of drawings?
- Figurative Drawing.
- Anatomy Drawing.
- Caricature Drawing.
- Life Drawing / Still life Drawing.
- Portrait Drawing.
- Landscape Drawing.
- Perspective Drawing.
- Cartoon Drawing.
What do the MEP drawings show you?
MEP drawings include
all the details regarding HVAC systems, wiring, and piping required to construct a commercial or residential structure
. They are necessary for component vendors, equipment manufacturers, and suppliers to understanding the mechanical intricacies of a building under construction.
What are the two types of working drawings?
These may include an ‘exploded’ view, with pieces drawn separately but in correct relative positions, a ‘
general’ assembly drawing
where everything is drawn in its right place, and a detailed assembly drawing, which is a drawing of working assembly with measurements.
