Turn the knob from the “Off” to the “Pilot” position
. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
Why is my gas fireplace not turning on?
If gas is coming out of the pilot, but it still won’t light, the
spark igniter
could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. … The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
How do you turn on an old gas fireplace?
- Look over the user manual included with your fireplace. …
- Remove your fireplace’s outer cover. …
- Put a fireplace key into the device’s gas valve knob. …
- Hold a long lighter up to the burner and ignite it. …
- Turn the gas key. …
- Replace the fireplace’s outer cover immediately.
How do you use a gas fireplace key?
- Look around the base of the fireplace and locate a small metal hole; this is the keyhole. …
- Grasp the handle of the key, which looks like a long metal pole. …
- Turn the key counterclockwise approximately 1/2 turn to release the flow of gas into the fireplace logs.
Do all gas fireplaces have a pilot light?
As colder weather approaches, you’ll want to make sure your fireplace is in working order.
Most gas fireplaces have a standing pilot light
, which is a small flame that burns even when you aren’t using your fireplace. … If you don’t see the valve, it may be behind the fireplace, so look for it there and turn it on.
What can I do with unused gas fireplace?
- No Heat Required. …
- Fill It With Fire-Ready Logs Anyway. …
- Embrace a More Organic Design. …
- Fake Stacked Logs With a DIY Summer Front. …
- Place Tiered Candles Inside. …
- Cover It With an Ornate Fire Screen. …
- Use It as a Shadow Box to Display a Favorite Object. …
- Handsome Firebox.
Is it safe to use a gas fireplace that hasn’t been used in years?
If you haven’t used the fireplace in 5 years then
more than likely you have air built up in the gas line
. The best thing to do would be to turn the switch on and let the line bleed for 90 seconds. Turn it off and then try again. If doesn’t start by the third time then you may have an issue with the starter components.
How do I know if my gas fireplace is working?
A properly operating gas fireplace will have a safe and secure glass enclosure, will ignite without delay, have a
clean blueish color flame
and will vent properly out through a termination cap that is clear from debris or obstruction.
How do you know if you have a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube.
If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds
, that’s the sign of a thermocouple malfunction.
Can I use a lighter to start my gas fireplace?
Flame-Lit Pilot Light
Turn on the supply line to the gas fireplace. Light
a match or butane candle lighter
and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. Pull the match or light away when the burner lights.
Where is the gas valve for my fireplace?
Gas fireplace: The shut-off for a gas fireplace is typically
on the control panel
. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.
Is it safe to leave a gas fireplace on all night?
No, you should not leave your gas fireplace on overnight as you risk carbon
monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater,
you will not have a gas leak
. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
What if pilot light goes out on gas fireplace?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail,
gas will continue to flow even after
the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
