DRYLOK Clear
Masonry Waterproofer
is the first non-pigmented masonry waterproofer specifically formulated for use on bare masonry floor and wall surfaces. This Patent Pending Technology provides a durable, waterproof, easy to clean, non-yellowing high gloss finish.
Is there anything better than Drylok?
per gallon of coverage,
Sani-Tred
can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.
Does Drylok come in clear?
DRYLOK GAL UGL DRYLOK CLEAR WATERPROOFER in the Waterproofers & Sealers department at Lowes.com.
Does Drylok come in semi gloss?
DRYLOK – Solid –
Semi
-Gloss – Paint – The Home Depot.
Does Drylok come in spray?
You can spray drylok but not with a homeowner or
light duty commercial airless. It takes a stout pump like a Graco 733 and even then you need to remove the filters. When sprayed it still needs to be backrolled to work the paint into the pores.
Is Drylok anti mold?
While both of our traditional Oil Base and Latex Base DRYLOK
®
Masonry Waterproofers are inert coatings, which mean they will not promote the growth of mold/mildew, DRYLOK
®
Extreme has a
mildewcide additive
to further prevent the potential for mold/mildew growth on the dry paint film under extreme situations.
Should you Drylock basement floor?
So, there’s no need to fuss around when prepping to paint.
According to the manufacturer, Drylok
can be used on garage floors
, basement floors, brick patios, poured concrete and block patios, and wood steps. It can be used to prolong the life of and beautify these surfaces.
What is the difference between Drylok extreme and Drylok pro?
DRYLOK Pro offers
mold and mildew resistance
, stops water under hydrostatic pressure and water entering by wind driven rain. The warranty is the the greatest of any of our DRYLOK products. The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color.
Should I use Kilz before Drylok?
Yes, using a good quality
100% acrylic latex paint
. DRYLOK® Masonry Waterproofer can also be tinted for a decorative finished coat. So it seems clear that you should put the Drylock on first and then any other paint, including the anti-mold primer.
Is Liquid Rubber better than Drylok?
Liquid
rubber
coating is easily painted onto basement surfaces and is ideal for waterproofing a home that is frequently exposed to flooding or wet conditions. … Drylok is applied to the walls of a basement similarly to how one would apply paint to the walls of a home.
How many coats of Drylok should I do?
Just as with a thorough paint job, proper application of DRYLOK Masonry Waterproofer requires
two coats
. Dry times vary based on temperature and humidity, but it typically takes at least four hours for the product to dry.
How well does Drylok?
The UGL Drylok Extreme system is guaranteed to work for
up to 15 feet of head or water pressure
and for up to 15 years. It is not a crystalline system—it’s more paint-like—although the manufacturer states that it does penetrate the concrete. … A double-coating of UGL Drylok Extreme that still weeps water.
Can I put Drylok over old paint?
DRYLOK loses its waterproofing ability when applying the chemical over painted walls or flooring containing latex or oil-based paint. …
You can still apply DRYLOK over latex or
oil-based paint but the chemical will not prevent moisture from seeping in through the concrete wall or flooring.
Can you apply Drylok with a roller?
Do not thin DRYLOK®
Extreme Masonry waterproofer before and during application. To apply the first coat to bare masonry, use a three-quarter-inch nap roller, a DRYLOK® brush or a quality nylon bristle brush. If you use a roller, brush the first coat to fill all the holes. …
