Yes, it really
is possible to find hot tubs for groups of up to 6 people that will fit through a standard door
! Don’t expect these spas to be comfortable for large groups regularly, but hot tubbing as a small family—or the occasional social soak with guests or neighbors—will be totally doable.
Does a hot tub need to be hardwired?
For most full-sized spas or hot tubs, the National Electrical Code (NEC) requires:
Hard-wiring the spa into a ground fault circuit interrupter
(GFCI)-protected 220 to 240V, 50- or 60-amp dedicated circuit.
Can you fit a hot tub through a regular door?
Yes, it really is
possible to find hot tubs for groups of up to 6 people
that will fit through a standard door!
What surfaces can you put a hot tub on?
A hot tub requires a stable surface — whether it’s a
concrete slab, reinforced deck
, or firmly compacted soil with crushed gravel. There’s also the option to have the hot tub installed in the ground but that still requires a concrete vault.
How much space do you need for hot tub?
A good rule of thumb for a hot tub is to give yourself
about a foot of space on each side of the tub
. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.
Is getting a hot tub worth it?
When
you use your hot tub regularly and thoroughly enjoy its intended benefits
, it’s worth the investment. … When you choose the right hot tub, you won’t regret the investment. In fact, you’ll most likely discover the benefits you never even expected.
What do you plug a hot tub into?
There are only two ways to connect a hot tub to power. The first is through a low 110v connection that simply plugs into
a wall outlet
, and the second is through a 220v, 230v, or 240v connection directly to your home’s central circuit breaker box.
Does a hot tub need to be plugged in all the time?
The answer is
yes
! Hot tubs are designed to be left on permanently and this is how they work best. Of course, they’ll need to be drained regularly but for the most part, they are left on 24/7.
What is the best base to put a hot tub on?
A concrete surface
is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
Do hot tubs use a lot of electricity?
How Much Electricity Does a Hot Tub Use Per Month? The primary energy hog in a hot tub is the
heater
, which will draw around 1,500 watts or 6,000 watts, depending on whether it’s a 120-volt heater or a 240-volt heater. … Even when the tub is not in use, the heater will run occasionally to maintain the water temperature.
Does hot tub have to be perfectly level?
They are made of heavy-duty plastic and can be picked up and moved if you ever need to relocate your hot tub. (For best results,
your platform must be completely level
.) E-Z pads can also be used by themselves on any level surface.
How much room do you need for a hot tub cover lifter?
Some hot tub cover lifters place the cover vertically behind your hot tub. You’ll need
approximately 18 inches of clearance behind the tub
for this style lifter. Others lift the cover directly above the spa, which provides a great, space-saving solution.
How much space do you need for a 4 person hot tub?
With all this in mind, if you are thinking about a 4 to 6 person hot tub, plan on utilizing
around 10’x10′ of space
for your new hot tub.
Should I shower after hot tub?
It will lessen the chance that your hot tub filter will become clogged from your oils and body waste. Shower after using the hot tub as well, to
wash off any bacteria, algae
, waste, etc. … The longer you wait after using the spa to bathe, the longer any bacteria or viruses are able to sit on your skin.
Are hot tubs high maintenance?
Is a hot tub HIGH maintenance?
Not really
. It just requires a basic understanding of water chemistry and a simple schedule (which we’ll dive into), but it’s not expensive. All you really need is some chemicals and testing supplies which is about a $20/month investment.
