How Do I Unlock My Thermostat?

Press the UP/DOWN buttons to change each flashing digit

, using the NEXT button to cycle through which digit is flashing. Press and hold the NEXT button for at least 5 seconds. The thermostat will return to the Normal Run screen without the padlock, and the thermostat is now unlocked.

Can you lock a Trane thermostat?

Lock Trane Programmable Thermostat Keypad

Press

and hold the “Next” button for 5 seconds

. Then, you can see “Lock Code” and then “Set Code” will be displayed on the top of the screen.

How do you unlock a Trane thermostat?

1. Examine your thermostat and find both the (+) and (-) buttons.
2. Put one finger on the (+) and one finger on the (-) button. Press these buttons at the same time.
3. Hold both buttons down for approx. five seconds and then release. Your thermostat should now be unlocked.

How do I unlock the control temperature on my thermostat?

1. Locate the “MODE” and arrow (“Up” and “Down”) buttons on your Carrier thermostat control.
2. Press and hold down “MODE.”
3. Press both the “Up” and “Down” arrow buttons simultaneously.
4. Wait a second. The “Locked” icon disappears from the screen.

How do I reset my Trane thermostat?

1. Shut Down Your AC at the Thermostat. …
2. Find Your Circuit Breaker Box. …
3. Reset the Circuit Breaker for Your AC Unit. …
4. Wait 30 Seconds. …
5. Turn the AC Thermostat Back On. …
6. Call Vredevoogd Heating & Cooling for all your Furnace & AC needs.

How do you unlock a venstar thermostat?

Press and hold the MODE button to lock or unlocked the thermostat

buttons. Press the UP and DOWN arrow buttons while you hold the MODE button.

How do I set the temperature on my Trane thermostat?

1. Step 1: Press and hold the ‘System Mode' button. …
2. Step 2: To set the input temperature setting, all you have to do is push the up or down buttons. …
3. Step 3: If you wish to override the manual temperature, Press the Hold button on the thermostat.

How do you override thermostat settings?

Press and hold the temperature adjustment button

. Doing this will allow you to override the current temperature for the duration of the current time period of the programming. Then you can adjust the temperature as you see fit.

How do I reset my thermostat?

A common way to reset almost any thermostat is

to hold down the reset button for 5+ seconds

. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.

Why can't I change the temperature on my thermostat?

This is most commonly a problem if you have a newer thermostat or have recently lost power due to a power outage or low batteries. An old thermostat may also need recalibration over time. If

your thermostat doesn't stay calibrated properly

, you may need to replace it.

Why won't my Trane thermostat come on?

You may have a tripped circuit breaker. Recommended Action: Check your home circuit breaker box and reset circuit breaker. Your thermostat/control may be off or set incorrectly. Recommended Action: Check to

make sure your thermostat/control is on and set to cool

.

How do you unlock a thermostat on a venstar t2800?

Press and hold the MODE button to lock or unlocked the thermostat buttons

. Press the UP and DOWN arrow buttons while you hold the MODE button.