Why Is My Manitowoc Ice Maker Not Working?

Water level is too high or low

– Make sure the water trough level isn’t too high or too low. Water temperature is too high – Ice machines require a cold water supply. Make sure there is not a hot water supply line into the machine. Water filter is broken – The water filter might be too dirty or damaged.

Why isn’t my Manitowoc ice machine making ice?

The Manitowoc ice maker will not make ice

if the compressor does not start

. If the compressor will not start, even if the gear motor is running, check for water in the water reservoir. … When clogged, the screen will reduce the flow of water. In order for the compressor to start, water needs to touch the water probe.

How do you reset a Manitowoc ice maker?

1. Press the OFF button for 3 seconds.
2. Wait for ice to melt off the evaporator.
3. Disconnect power to the machine and wait about 10 seconds.
4. Plug the machine back in and press the ON button. A blue light should appear, indicating that the unit has been reset.

What causes a ice maker to stop working?

Cause: A common cause for a clog is

frozen water in the line

. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

How do you troubleshoot an ice maker?

1. Check the shutoff arm.
2. Check the supply valve.
3. Inspect the water supply line.
4. Test the shutoff switch.
5. Check the freezer temperature.
6. Inspect the ejector gear.
7. Test the ejector motor.
8. Test the ice mold heater.

How do I keep my ice maker from making ice?

The way to reduce your ice production in an uncomplicated ice maker is with a

simple shelf

. All you need is a small plastic shelf, preferably slotted to drain melt-off. This will cause a smaller amount of ice to trigger the fill-bar and stop the ice maker to produce less ice.

What does a dump valve do on an ice machine?

This process includes filling the trough with water,

before the freeze cycle, and then dumping the water down the drain

. This allows the ice machine to flush minerals out of the trough.

How do I reset my ice maker?

Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power,

press the feeler arm three times in succession

. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.

How do I reset my ice maker counter top?

1. Step 1: Unplug power cord from wall outlet. …
2. Step 2: Manually adjust the ice shovel position through its cycles. …
3. Step 3: Plug power cord back into wall outlet.
4. Step 4: Power unit on.

Why wont my ice maker fill with water?

Water may not be reaching the ice maker due to a frozen line,

missing filter

, or a closed supply valve. … When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.

How do I know if my ice maker is working?

1. If the icemaker mold is empty, you can manually pour about 4 ounces of water in the icemaker mold.
2. Wait about 2 hours.
3. If the icemaker has dropped ice cubes out from the mold, you know the icemaker itself is working.

What is wrong with my Whirlpool ice maker?

In other instances, your a Whirlpool ice maker not making ice may be due to

insufficient water supply

. A clogged water filter, kinked water line hose, or defective water inlet valve can restrict the water flowing to an ice maker. … Schedule a professional repair to replace a defective water inlet valve.

How do I unfreeze my ice maker water line?

A more convenient option is to use a hairdryer to quickly thaw the lines. Confirm first that your ice maker is not malfunctioning.

Pour about 1/2 cup of water into the ice maker’s water reservoir

. Wait two hours so that the water has time to freeze and dispense the ice.