Can A Mobile Home Hold A Fish Tank?

just stack some blocks under where the tank will be, pound in a couple wedges and you should be fine. I agree with reefermike, you should definitely reinforce the floor, and

if done in a solid manner (as stated above) it should hold just fine

.

How much weight can a mobile home hold?

A mobile home floor can hold

up to 40 pounds of weight per square foot

. As long as you don't have several heavy objects all sitting on the same square foot of space, then your mobile home can carry a decent amount of weight.

Can my house support a fish tank?

Aquariums up to 55 gallons can be placed almost anywhere without much worry at all

. Many tanks larger than 55 gallons and no more than 125 gallons will be okay, if they are placed in a good structural location and your floor framing is free from significant defects.

Can my floor hold a fish tank?

Yes, it can

. Put it over as many joists as possible, and you'll be fine. If it's in the basement, as in over carpeted concrete, you could place just about any sized tank you want. Yeah, if its in the basement you could have as big a tank as the room can fit!

Can you hang a TV in a mobile home?

Mounting a TV in a mobile home

requires knowledge of the home's wall material, and the width and type of studs within the walls

. Most wall materials alone will not support a TV's weight. Drilling in the center of studs and using the mount manufacturer's recommended hardware should offer the best hold.

Can you put tile in a mobile home?

Yes, you can add tile to a mobile home

.

Tile is especially great for kitchens, bathrooms, and laundry rooms. You will need to remove the old flooring, check the subfloor for any damage and repair if necessary, lay down the backer board and secure it, lay the tile, then finally grout it.

How far apart are mobile home floor joists?

Studs are the vertical boards and are normally 2′′ x 4′′ and spaced

every 16′′

in a manufactured home. That's what the term 16′′ OC, or ‘on center' means in construction lingo. Better quality manufactured homes will have 2×6 studs and more affordable homes will have 2x3s.

Can my floor support a 200 gallon fish tank?

You will want to make the tank sit perpendicular across the joist

. I would also consider adding additional bracing to the joist under the tank to transfer the load to the basement floor. Too much weight can cause them to start twisting. Then you should be fine.

Can you put a fish tank on laminate flooring?

Just make sure you wipe off water that dripped around the tank and it will be fine

. If not, the flooring will bubble up at the seams, though I think some newer floorings claim to be waterproof.

How much weight can a residential floor hold?

The International Residential Code, on which most local building codes are based, requires that floors in non-sleeping rooms must support a minimum live load of

40 pounds per square foot

, and floors in sleeping rooms must be able to handle a live load of 30 pounds per square foot.

Can a fish tank tip over?

as long as the depth of the tank is a decent size im sure youll be fine

. or look into a cube or a shallow reef tank. The 400 pound of weight in the sump would make it also pretty much impossible to topple over… Nothing will stop a kid from breaking it, or breaking their skin on the corners though…

Can you put an aquarium on carpet?

I've had aquariums on carpet in the past without any problems

. Just be careful with your spills, etc.

How heavy is a 75 gallon fish tank?

Can I put drywall in a mobile home?

Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets,

should be no problem to install

.

How do you hang something heavy in a mobile home?

Use interlocking adhesive strips that are designed to hold objects on walls

. These strips are two-part hangers that adhere to each other after they are mounted. Place one set of strips on the back of the item you wish to hang. Hold the item to the wall to take note of where you want to place it.

Can you tear down walls in a manufactured home?

Is it possible?

Typically, you can remove interior walls in a manufactured home as long as it's not load-bearing

. Load bearing walls in manufactured housing include the exterior walls and the marriage line in a double wide. But, I have to suggest that you consult an engineer before you do it (legally).

Can you put a walk in shower in a mobile home?

Mobile Home Walk-In Showers

But, if you hate the way your shower looks, you're likely to just get more stressed in your shower.

The mobile home walk in showers from Mobile Home Parts Store are perfect for renovating your bathroom and making it into the spa it should be

.

Can you put laminate flooring in a mobile home?

A mobile home is a small enough space that you can easily tackle many do-it-yourself projects, such as installing laminate flooring

. Flooring options with laminate come in many designs, so you can choose the style that best accents your décor.

What is a subfloor in a mobile home?

What is the Subfloor in a Mobile Home? For many years, mobile homes have been constructed with

sub-flooring made of particle board which is made from sawdust and glue that essentially acts like a sponge when it gets wet

. Even the least amount of dampness causes bowing, warping, rot, and soft spots.

Do manufactured homes have studs?

Manufactured homes are largely built the same.

There are still manufactured homes built with 2”x3” interior wall studs

, however. Keep in mind that interior, non-load bearing walls are simply dividing up the interior space of the home and are not structural.

How do you reinforce a mobile home floor?

Do manufactured homes have wood floor joists?

The mobile home's wood frame is usually made of 2X6, 2X8 or 2X10 floor joists

. Then plywood, particleboard or OSB is placed on top of the wood frame to create the subfloor, also called the decking.

How do I reinforce my aquarium floor?

How much weight can a 2×10 floor hold?

Each 2×10 will support

1,200 lbs

.

How much does a 200 gallon fish tank weigh with water?

Poly-mart has a 200 gallon water storage tank.

55 lbs

is the weight.