This feature helps provide outstanding power and driveability, with reduced emissions and better fuel efficiency
36
—plus easier maintenance and repair.
What does PGM-FI do?
This feature helps provide outstanding power and driveability, with reduced emissions and better fuel efficiency
36
—plus easier maintenance and repair.
What does it mean when my PGM-FI light comes on?
The PGM-FI light just indicates
the computer detected a problem
, a sensor failed to report data or something seems ‘out of bounds’ for the computer (ECU) to process. The PGM-FI light is reset during the start sequence but the stored code is not erased.
What does PGM mean in a car?
Programmed Fuel Injection
, or PGMFI/PGM-FI, is the name given by Honda to a proprietary digital electronic fuel injection system for internal combustion engines with port injection. It is available since the early 1980s. This system has been implemented on motorcycles, automobiles, and outboard motors.
What happens when main relay goes bad?
If the main relay is not supplying the engine computer with the power it needs, then the engine will not be able to crank and run the right way. Failing to get the main relay replaced will usually lead to the
car being unusable
.
What is the difference between PGM-Fi and fuel injection?
In carbureted systems the fuel
gets drawn
from the tank, while in a Fuel Injected system it depends on a fuel pump installed inside the tank for a fine-grained control over fuel flow. The fuel injection nozzle also goes directly inside the combustion chamber.
What year did Honda start using fuel injection?
The CX500 Turbo (a 500cc export model) was the first Honda motorcycle to be sold with fuel injection, in
1982
. Since then, fuel injection has been available on a wide range of motorcycles, from large-displacement 1800cc bikes down to small-displacement 125cc models.
What do you do if your malfunction indicator lamp is on?
It is
a sign that your vehicle’s engine is misfiring
. The issue is a major one and you should stop the engine immediately to prevent serious damage. For instance, it might cause the catalytic converter to overheat and even cause a fire.
What is the meaning of malfunction indicator?
Don’t Just Turn It Off; Fix the Problem
The light could be a minor issue, such as a faulty gas cap, or it could mean something more serious, such as a misfiring engine. … The check engine light — more formally known as the malfunction indicator lamp — is
a signal from the car’s engine computer that something is wrong
.
Is Honda CRV fuel injected?
Direct injection can enhance an engine’s efficiency. … However, with the CR-V’s direct injection,
fuel is sprayed directly into the combustion chamber
.
What is PGM full form?
PGM –
Process Group Manager
.
Can all cars run on E10?
While
E10 petrol is safe for almost all modern cars to use
, the Department for Transport (DfT) estimates that as many as 600,000 cars are not compatible with the fuel, including up to 350,000 that are in daily use.
Can Honda CRV use E10?
Is my Honda car compatible with E10 fuel?
Yes if your Honda has
a petrol or hybrid engine and was produced since 1996, you can use E10 fuel. All Honda petrol car models produced post-1996 (year model) are fitted with electronic fuel injection (Honda PGM-FI) and will be compatible with the new E10 fuel.
What are the symptoms of a bad relay?
Car suddenly stalls while operating
: One of the most common symptoms of a failed ignition relay is a car that suddenly stalls while operating. If the ignition relay shorts, burns out, or otherwise fails while the engine is operating it will cut off power to the fuel pump and ignition system.
What causes a main relay to fail?
Even in low-level signal applications,
accidents and faulty UUTs
can cause relay failures, and inrush currents, caused by hot-switching capacitive loads, and voltage spikes, caused by hot-switching inductive loads, accelerate relay aging. … Below are examples of failed relays.
