Dorman – Autograde – Oil Drain Plug Pilot
Point M14-1.50, Head Size 16mm
(Part No. 090-053CD)
What size is the oil drain plug on a 2011 Honda Pilot?
Dorman – Autograde – Oil Drain Plug Standard
M14-1.50, Head Size 17mm
(Part No. 090-033.1)
What size is the oil drain plug on a 2018 Honda Pilot?
Dorman – Autograde – Oil Drain Plug Standard
M14-1.50, Head Size 17mm
(Part No. 090-033.1)
What size is a Honda drain plug?
Dorman – Autograde – Oil Drain Plug
Standard M14-1.50, Head Size 17mm
(Part No. 090-033.1)
What size is the oil drain plug on?
Oil Drain Plug Standard
M14-1.50
, Head Size 17mm.
How many quarts does a Honda Pilot take?
| Viscosity: 0W-20 (All TEMPS) | Capacity: 5.7 quarts (with filter)After refill check oil level. 5.4 quarts. w/ofAfter refill check oil level. | Torque: 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. |
|---|
When should I change the oil in my 2011 Honda Pilot?
The recommended oil change interval for the Honda Pilot is
every 7,500 miles or every year
, whichever comes first.
How much oil does a 2015 Honda Pilot take?
Capacity:
4.5 quarts
(with filter)After refill check oil level. 4.2 quarts. w/ofAfter refill check oil level.
How do you get a stuck oil plug out?
You’ll need to
spray penetrating oil on the oil plug
and leave it to sit for several hours. Then you can take a small hammer and tap counterclockwise to ensure that you are loosening the plug.
How many quarts does a 2010 Honda Accord take?
Capacity:
4 quarts
. w/ofAfter refill check oil level. 4.2 quarts (with filter)After refill check oil level.
What size is the drain plug on a 2007 Honda Accord?
Dorman – Autograde – Oil Drain Plug Standard
M14-1.50, Head Size 17mm
(Part No. 090-033CD)
Are all oil drain plugs the same?
All drain pans are not designed the same which
is why different drain plugs are required for different vehicles. … There is as much engineering going into the oil drain plug as any other part or system on the vehicle. Some vehicles have a reinforced drain plug hole and others do not.
Are all drain plugs the same size?
There is no universal drain plug size
, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket. Most shops probably reuse that instead of replace it.
What size wrench Do I need to remove the oil drain plug?
GearWrench
16mm
Magnetic Drain Plug Socket 3/8 Inch Drive 6 Point.
