Many different types of wood are suitable for fascia boards.
Spruce, pine and fir
are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
What is the best material for fascia boards?
Typically for fascia boards,
cedar and redwood
are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What material is used for fascia?
They can be made of
polyvinyl chloride (uPVC), non-corrosive sheet metal, or wood
. In non-domestic structures, they can even be made out of ornately carved stone. However, most homes and residential structures in the United States tend to use wood fascia boards. Wood has proven to be the most effective board material.
What are fascias made of?
What materials are used to make a fascia? There are three main types of fascia material:
wood, uPVC and aluminium
. Wood and uPVC are most commonly used on domestic properties where aluminium will more likely be found on industrial or commercial buildings.
What timber do you use for fascia boards?
Timber: Popular hardwood and softwood timber species for fascia board are
western red cedar European oak, Utile, Iroko, Douglas fir, Larch and Accoya
. The latter is an extremely durable sustainable option.
Should I wrap fascia in aluminum?
Wrapping your fascia with aluminum or vinyl is the same idea. The new layer of material forms an impenetrable shield that blocks all water from getting to the wood. Basically what it does is keep the wood completely dry.
Do roofers replace fascia boards?
Most roofers, in that case, are generally trained to spot problems in fascia and gutters as well the training required to take care of them. … Fascia both keeps the gutters secure and seals the interior of the attic to some degree. Every so often in the lifespan of your home, you will see
fascia repair or replacement
.
Can I use plywood for fascia?
Even though plywood siding isn’t a good fascia material, it
works well for soffits
, which are out of the rain and have to be painted and cut to install light fixtures and vents.
What is difference between soffit and fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
What goes on first fascia or soffit?
It is ideal that
soffit and fascia materials
be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit. However, plain flat plywood is the one used most commonly.
Can I use 2×6 for fascia?
Depending on what you will be using for a soffiting, you could install a 2×6
over
the tails then cover that with a 1×8 for looks and to give a relief for your plywood soffit. If you are installing perf soffiting and covering the fascia, then leave off the 1×8 and install a 2×8 like Ken said.
Can I use 2×4 for fascia board?
Install 1×6-80
“
fascia boards to the 2×4 trusses. … Install the fascia so the bottom edge of the roof sheathing will rest on the beveled edge. Install 22-1/2′′ long 2x4s between the trusses to support the fascia boards where they butt.
Should I use treated lumber for fascia board?
Purchase
pressure-treated lumber
to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. … Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.
How thick should fascia boards be?
Fascias are typically made from
1-inch material
, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction.
