Choosing a fiberglass pool shell with a tanning ledge built-in will add around $370 more for installation. The cost to buy a separate fiberglass tanning ledge can be
between $5,000 and $15,000
, depending on if it’s elevated.
Can a liner pool have a tanning ledge?
Liner pools can be made with a tanning ledge
. That being said, if you live in an area with a lot of rain and clay soil, don’t do it. Water will fill the ground with water which may flow just under the surface.
Can you have a tanning ledge in a vinyl pool?
Can you put a Tanning Ledge on an inground vinyl pool? You sure can! Also known as a
Baja Shelf
or Sun Lounge, they replace the standard drop-in white thermoplastic steps, and become part of the pool itself.
Can you add a tanning ledge to above ground pool?
Tanning ledges are available for most inground pools. (To the best of my knowledge, they
‘re not available for above-ground pools
.)
How long should a tanning ledge be in a pool?
Tanning ledges are in the shallow area on one side of your pool. Tanning ledges can be built in all sorts of sizes depending on what you want, the typical measurements for a tanning ledge are
at least five feet in length and ten feet wide
, and 6 to 18 inches in deep in water.
Is a vinyl pool worth it?
Vinyl Means Lower Maintenance
Modern vinyl liners are
extremely durable
. Vinyl is a nonporous surface which means it won’t require as many chemicals as a concrete pool. Vinyl’s smooth surface also makes it harder for contaminants like algae to take hold and wreak havoc on your pool.
What is a tanning ledge on a pool?
A tanning ledge is an addition to your swimming pool that consists of
a raised platform or area within the water that is extremely shallow
. This expansive shelf could be anywhere from just a few inches deep to over a foot. The idea is that you can sit in the water without having to swim or float.
Should I get a sun shelf in my pool?
Sun shelves are
better than lounge chairs
because you won’t get nearly as hot or sweaty. However, sun shelves also feature shallow water, which means you can enjoy its perks without having to change into a bathing suit. Furthermore, sun shelves are beneficial for those with children or pets.
What is an infinity edge pool?
An infinity pool is also called an infinity edge pool or a zero edge pool. It is
a reflecting or swimming pool where the water flows over one or more edges
, producing a visual effect of water with no boundary.
How deep is a pool bench?
Also called a “sun shelf” or “Baja bench,” a tanning ledge is a solid span along a pool perimeter that’s similar to a wide, shallow step or bench—usually about 4 to 8 feet in length and
3 to 18 inches deep
.
How deep should a tanning ledge be?
How deep is a tanning ledge? The depth of most tanning ledges is
approximately nine inches
, meaning that the ledge itself is no more than 12 inches deep. At this water level, many activities that are less possible at deeper depths become enjoyable, and the pool becomes a place where more people are able to relax.
Can you make a gunite pool larger?
Enlarge Your Pool
Maybe, you want a bit larger pool. … If you’re just adding to the old gunite pool, you may not have to remove the old shell. Just
dig behind the existing wall and remove
a section of the pool wall to open up the pool.
What is a sun deck pool?
An Ideal Cooling Spot
You already know by now what is a sundeck pool — it is
the go-to place of most people as it provides shade from the sun during summer
. Having bubblers in a pool is one great addition to your pool since it can cool down the temperature.
How deep is a Baja shelf in a pool?
A baja shelf is large and shallow. It’s often the same depth (
about 3 – 6 inch water depth
) as the first step of a pool, but some can have an even deeper entry step after stepping in from the first step of the pool.
What is a Shamu shelf?
The “Shamu shelf,” at the Gregory Gymnasium Aquatic Complex looks a lot like
the shallow area for Sea World’s killer whale
. … A third possibility is the “Shamu shelf,” so called because it approximates the large shallow area where Sea World’s killer whale slides up to present himself to spectators.
How long will a vinyl pool last?
Pools with vinyl liners will last
more than 20 years
, as long as you replace your liner every 6-12 years. Concrete pools have exceptional longevity, but you need to resurface the concrete every 10 years or so. Fiberglass pools have the longest lifespans of any in-ground pool, often easily surpassing 30 years.
