You must yield the right of way at traffic signs. Traffic is moving at 30 mph on a street you plan to cross. You should about two thirds of a block gap in each direction before crossing. Turning right and accelerating to 30mph takes
about 6 seconds
.
When turning right into 30 mph traffic do you need a gap of at least seconds to complete the turn and establish space around your vehicle?
If a vehicle is approaching from the right at 30 mph (45 feet per second), you will need a gap of at
least_270 feet
to safely cross the intersection.
When approaching a intersection if possible begin searching 20 30 seconds ahead of the intersection?
Searching 20-30 Seconds Ahead
By searching ahead 20 to 30 seconds to identify an intended path of travel and possible alternative paths 12 to 15 seconds in advance, the
driver has more time and space to exercise options
.
How long does it take to make a pass when starting at 40 mph and accelerating to 50 mph?
To give you an idea of how much time and distance, if you are traveling at 50 mph and passing someone going 40 mph, you will need
about 10 seconds and 736 feet
to safely complete the pass.
When entering city traffic you need a gap of at least?
Leave
3 seconds
of space between you and the vehicle ahead of you. Make sure you can stop safely, if necessary.
What is the 3/6 second rule?
The 3-6 second rule ensures the
proper “space cushion”
to keep you and other drivers safe. When driving on slippery roads, you should double your following distance to at least… 4 seconds. Stay to the right and only use the left lane for passing.
What is the proper position to begin a right turn?
Right Turn:
As you prepare to turn, reduce speed and stay as far to the right as possible. Begin
the turn in the lane nearest to the right-hand curb
and end the turn in the lane nearest the right-hand curb.
How far in advance should you begin searching ahead of an intersection?
Searching
20 – 30 seconds ahead
– By searching ahead 20 to 30 seconds you can identify potential problems. Searching 12 – 15 seconds ahead – By searching ahead 12 to 15 seconds you can identify objects that could require a change in speed or direction.
How far in advance should you begin searching ahead of an intersection *?
To have adequate time and space to avoid obstacles in your path you need to search the traffic environment as far ahead of your vehicle as possible. Make every effort to establish a clear line of sight so you can search the traffic environment
about 30 seconds ahead
.
When approaching an intersection search to seconds ahead to determine if you have an open path of travel?
By searching ahead
20 to 30 seconds
and identifying an intended path of travel and possible alternative paths 12 to 15 seconds in advance, the driver has more time and space to exercise options.
When should you begin slowing down for a curve?
Judge how sharp the curve is. Slow down
before you enter the curve
. Braking on a curve may cause you to skid. Reduce speed before entering the curve, and slowly lighten the pressure on the brake until reaching the apex point (where the car is closest to the inside of the curve line).
How far does a car travel in 1 second at 40 mph?
If you are moving at the rate of 40MPH, how many feet do you travel in a second? At 40 miles per hour, you are traveling
58.8 feet per second
. To convert miles per hour to feet per second, multiply the miles per hour figure by 1.47. There are 5280 Feet in a mile and 3600 Seconds in an hour.
How far will a vehicle travel in one second at 65 mph?
At 65 mph, keeping one second of following distance means the vehicle is traveling
100 feet behind the vehicle in
front. It takes an automobile a minimum of 150 feet to stop. With a 100 foot gap plus the auto’s stopping distance of 150 feet, an impact would occur within 250 feet.
What should not be done on expressway?
- Stop on the Highway. Accidents and emergencies happen, but you should never stop your vehicle on a highway lane unless you absolutely have no choice. …
- Back Up. …
- Drive on the Shoulder. …
- Use the Median as a U-turn. …
- Exit Your Vehicle.
Do you have to let someone merge?
According to the California Driver Handbook, drivers must enter the freeway at or near the speed of traffic and
should not stop before merging into traffic unless it is absolutely necessary
. Drivers are also discouraged from trying to merge into small gaps to avoid following too closely.
What is the safest turnabout to use?
Backing into a driveway or an alley on the right side
is the safest turnabout maneuver. When parallel parking on the right, turn the wheels sharply to the left when your front bumper is even with the front vehicle’s rear bumper.
