5 Answers. The axle nut is
36mm
.
What size is the axle nut on a Pontiac Grand Prix?
Dorman – Autograde – Flanged Hex Spindle Nut M27-
2.0 Hex Size 34mm
(sold by each) (Part No. 615-144)
What size is the axle nut socket?
This
36mm
axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
What size is the axle nut on a 2006 Pontiac Grand Prix?
36mm
, if you’re replacing the wheel bearing you need to clean the axle threads, lube them and torque a NEW nut to spec. torque.
What are the most common axle nut sizes?
| Item No. Description Weight | 30410 3.25′′ 8 pt. Axle Nut Socket 2.7 lbs (1.2 kg) | 30411 3.5′′ 6 pt. Axle Nut Socket 2.95 lbs (1.3 kg) | 30412 3.75′′ 8 pt. Axle Nut Socket 3.15 lbs (1.4 kg) | 30413 4′′ 6 pt. Axle Nut Socket 3.35 lbs (1.5 kg) |
|---|
What size is the axle nut on a 2004 Grand Prix?
Beleive its actually
34mm
, but most people including myself, have gotten away with using 36mm. 04 Comp G.
What size socket do I need to remove a wheel bearing?
It’s a
4 MM
!
What are axle nut sockets used for?
The 9 Piece Axle Nut Socket Set is used for
removing front wheel drive axle nuts
.
What is the most common spindle nut?
There are several manufacturers offering one-piece spindle nut systems. The two most common are
the Axilok® nut by Metform
(see Figure 1) and the PRO- TORQ® nut by Stemco (see Figure 2). Each of these systems has a specific installation procedure required by the manufacturer to set wheel bearing end-play.
How do you measure axle nut size?
Stretch the tape measure across the nut’s diameter
to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.
What size is Toyota axle nut?
This
39 millimeter 12
point Axle Nut Socket for Toyota removes and installs axle nuts on 4 wheel drive axle hubs on Toyota/Lexus SUV models. It is manufactured from durable, impact-grade, heat-treated alloy steel. Also it is extra deep to fit over various axle lengths.
What size is the hub nut on a 2004 Pontiac Grand Am?
The axle nut is
36mm
. The three bolts are 1/2′′ – 13mm. Turn the wheel to get to thebolts. Keep the wheel straight to remove the hub and mind the sensor wires.
Do you have to replace axle nut?
I’m referring to the special nuts on major components like axle shafts and ball joints where a lost (or loosened) nut can cause accidents, even fatal accidents. … Whichever style is on your vehicle,
make sure you buy a new nut after removing the old one
. The old nut will not hold the proper torque a second time.
What happens if you over torque axle nut?
It’s possible to damage the wheel, rotor, and hub assembly.
The wheel can come off if over-torquing
the nuts/bolts is done.
