Can I use 225 55R17 instead of 235 55R17? Usually the lower the two-digit number, the wider the tire. The three digits (225) following the service type, tell us the cross-section width of the tire in millimerters. In the example,
the 50 width tire will bethe wider tire, whiler 55 will be slightly taller
.
How tall is a 225 55R17 tire?
| Metric Inches | Overall Diameter (Tire Height) 680 mm 26.8′′ | Tread Width 225 mm 8.9′′ | Rim Diameter 431.8 mm 17′′ | Sidewall Height 124 mm 4.9′′ |
|---|
What size rim do I need for 225 55R17?
| Unit: Imperial Imperial Metric | Rim Diameter 17.00 in | Rim Width Range 6.00 in – 8.00 in | Overall Diameter 26.74 in | Sidewall Height 4.87 in |
|---|
How tall is a 235 55R17?
235/55R17 Tires |
17 Inch
Tires | Firestone Complete Auto Care.
Can I use 215 50R17 instead of 225 50R17?
Banned.
It will be fine not much of a different at all
. It will throw your speedometer off a little.
What does the 55 mean in tire size?
The “55” grouping is the
aspect ratio
and is by far one of the most misunderstood dimensions. This is the height of the sidewall from wheel to tread relative to the width. Manufacturer’s represent this measurement in a percentage, so in our example, the sidewall is 129.25 millimeters — 5.08 inches — tall (235 x 0.55).
What does 225 55R17 mean on a tire?
This number means that
your tire has an aspect ratio of 55%
. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 55% of the width. In this case, the sidewall height is 0 millimeters.
Can 215 55R17 replace 225 55R17?
No, absolutely not
. The 215/55R17 sized tire has a smaller tread contact patch and a lesser load carrying capability relative to the 225/65R17 sized tire. Simply not safe.
How wide is a 235 55R17?
235/55R17 tire has an overall diameter of
27.2 inches
or 690 mm that represents the outer diameter of the tire or tire height.
What cars use 225 55R17?
- Acura (2) TLX (2014-2020) TLX-L (2018-2021)
- Alfa Romeo (1) Crosswagon Q4 (2004-2007)
- Audi (6) …
- BAIC (2) …
- BMW (7) …
- BYD (1) …
- Brilliance (1) …
- Buick (7)
How wide are 225 tires in inches?
Tire Sizes Explained
The section width can be converted to inches by dividing the width in millimeters by 25.4 like so: (225 millimeters) / (25.4 mm/in) =
8.86 inches
.
What size tire is 225 50R17?
225/50R17 Conversion
When converted to inches, 225/50R17 is equivalent to
25.9×8. 9R17
. 225/50R17 tire has a section width of 8.9 inches which is the measurement of tire’s width from its inner sidewall to its outer sidewall.
How tall is a 235 65R17?
| Metric Inches | Overall Diameter (Tire Height) 738 mm 29.1′′ | Tread Width 235 mm 9.3′′ | Rim Diameter 431.8 mm 17′′ | Sidewall Height 153 mm 6′′ |
|---|
What size tire is 225 65R17?
225/65R17 Conversion
When converted to inches, 225/65R17 is equivalent to
28.5×8. 9R17
. 225/65R17 tire has a section width of 8.9 inches which is the measurement of tire’s width from its inner sidewall to its outer sidewall. Rim diameter of 17 inches represents the size of the wheel the tire can be mounted on.
How tall is a 225 60R17 tire?
225/60R17 tire has a sidewall height of
5.3 inches
or 135 mm which is the measurement of tire sidewall from the wheel rim to the top of tire tread. Tire sidewall height or “profile” depends on aspect ratio – lower aspect ratio means lower tire profile.
Can you swap tire sizes?
It’s possible to change the size of your tires without actually changing the diameter
. One example is if you want larger rims – you can buy tires that compensate for the larger rims by reducing the “height” of the outer tire.
Can you go wider on tires?
As a general rule of thumb,
it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim
. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.
What does the number mean on the tire?
The two-digit number after the slash mark in a tire size is
the aspect ratio
. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
Can you put 235 tires on 225 rims?
No recommanded, but won’t matter much if…
since you don’t have quattro
it should be ok as long as the two tires are the same in the front and rear
. However, you mention 235 width and I assume they are still the 45 series then you are running on a larger diameter since 45% of 235 is larger than 45% or 225.
How much difference in tire size is acceptable?
When changing tire sizes, we recommend staying within
3% of the diameter/height of the original tire
. Any more than this and you face the risk of brake failure.
Which tire sizes are interchangeable?
Wheels and tires are not interchangeable words
. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.
What does 97 V mean in a tire?
Wheel diameter is the size of the wheel that the tire is intended to fit on. 97 = Load Index. Load Index indicates the maximum load carrying capacity of the tire. It is very important to only install tires with a load index that meets or exceeds your vehicle manufacturer’s specification. V =
Speed Rating
.
What’s the difference between 50 and 55 series tires?
The 50 (or 55) is the height of the sidewall, as a percentage of the width
. That’s your aspect ratio. With a 55 aspect ratio, and a 225 treadwidth, you’ll end up with a tire that is 3/4 of an inch taller that the 225/50.
What does 225 mean on a tire?
The number “225” stands for
the width of the tire in millimeters
– so in this case the tire is 22.5 cm wide. The “45” that follows is the aspect ratio – the height of the tire sidewall as a percentage of its width.
Can I use 225 60R17 instead of 225 55r17?
The thing about that size difference,
the tire will fit on the same rim
. But the exterior diameter of the tire will be slightly larger. This is because the sidewalls of the tire are a little taller. The 2 things that affects is that each rotation of the tire will move the car further.
What is the difference between 225 and 215 tires?
215 and 225 are the tire widths measured in millimeters. That said,
225 is wider than 215, however, in terms of aspect ratio, the latter has a higher profile
. These two tire sizes also serve a specific purpose depending on general usage.
How tall is a 215 60R17?
215/60R17 tires are
27.2′′
tall, have a section width of 8.5′′, and fit wheels with a diameter of 17. The circumference is 85.3′′ that translates into 743 revolutions per mile.
Does width of tire matter?
Are 225 tires wide?
| 215 mm Tires 225 mm Tires | Cheaper More expensive | Most Suit 6.5-8.0” wide alloys Most Suit 7.0-8.5” wide alloys |
|---|
Are all 225 tires the same width?
The real tire section width
Almost everybody knows that the 225/40/18 means that the tire section width is 225mm
, while the tire’s section height is indicated not in millimeters but as a percentage aspect ratio in respect to that width. On the other hand, there are people out there who are clueless even about this.
What is the difference between 50 and 55 on tires?
What does each number mean on tire size?
The two-digit number after the slash mark in a tire size is the aspect ratio
. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What size tire is 225 50R17?
225/50R17 Conversion
When converted to inches, 225/50R17 is equivalent to
25.9×8. 9R17
. 225/50R17 tire has a section width of 8.9 inches which is the measurement of tire’s width from its inner sidewall to its outer sidewall.
What tire size is bigger 215 or 225?
215 and 225 are the tire widths measured in millimeters. That said,
225 is wider than 215
, however, in terms of aspect ratio, the latter has a higher profile. These two tire sizes also serve a specific purpose depending on general usage.
