Part of sonic or ultrasonic waves, which have been transmitted, reflect back to the source when they hit an object
(e.g. fish school or seabed). A fish finder uses this ultrasonic reflection characteristic. The ultrasonic waves from the fish finder are transmitted directly underneath the boat.
How do fish finder read fish?
Do you have to be moving for a fish finder to work?
Anything which causes sound waves to bounce back between the boat and the bottom is, ideally, a fish! These fish finders can be difficult to use when moving slowly or stationary.
They’re best used when moving steadily
and to get an understanding of depth, features, and bottom type.
How are fish finders powered?
Fish finders and other electronics need electricity to function. On boats electricity is supplied from the batteries installed in the battery compartment. Excluding special super compact fish finders,
most fish finders use DC 12-24 volt power supply
.
Are fish finders cheating?
One of the most common arguments that a castable sonar is cheating is that it shows you where the fish are
. In fact, many anglers use sonars not to find fish, but instead to map waters and find good spots to target.
Do fish finders work from shore?
You can’t just use any fish finder when fishing from shore
. Most fish finding electronics are designed to be mounted on the transom of a boat. The cast sonar or CHIRP waves downwards in a cone from the transducer.
What is chirp on a fish finder?
CHIRP stands for “
Compressed High Intensity Radar Pulse
.” That’s a fancy way of saying it can show you fish that other forms of 2D sonar can’t.
What do weeds look like on a fish finder?
What do shrimp look like on a fish finder?
Distinguishing Bait, Fish, and Bottom
Small bait (shrimp, sand eels, etc.) will appear as
clouds either suspended in the water column or just off the bottom
. Larger bait and fish will appears as arcs either suspended or just off the bottom (where they can be confused with rocks and structure).
Can you use Side Imaging and Down Imaging at the same time?
What is really helpful is that many manufacturers have released models that have both side and down imaging sonar, so you don’t have to make a choice between two separate units.
Some units even allow you to use both types simultaneously and view them both simultaneously for the best of both worlds
.
Why do fish look like arches on sonar?
A fish arch forms as the transducer moves over the fish or as the fish moves through the sonar beam, if you are not moving
. In order for the arch to occur, the fish must enter the beam on one side and exit through the opposite side and basically bisect the cone.
Is side imaging worth the money?
Side scan is absolutely worth the extra money
! It takes a little time and effort to learn how to use it and, maybe more importantly, what to look for on the screen. The ONLY downside to SI other than the cost is that you will find so many good looking places to fish, you’ll have a hard time deciding what to try first.
How deep does a fish finder work?
Depth ranges of
10,000 feet
are standard with these broadband devices, which include sounders from all of the major brands.
Can you run two fish finders at the same time?
Any time you run two units with the same frequency there is a risk of interference
. However, with the modern noise rejection systems built into today’s fish finders, in most conditions when there is a unit on the front and back of the boat with the same frequencies, they will not interfere with each other.
What do the colors mean on a fish finder?
With Day Mode display, the intensity of the sonar return from a hard bottom will be shown in orange and a soft bottom will be purple.
Day mode colors range from purple (softest) to red to orange to yellow (hardest)
.
What is a deeper chirp?
Deeper CHIRP+ is
the world’s first castable, GPS enabled, Wi-Fi fish finder that utilizes CHIRP technology
. The three beam frequencies, crisp clarity and extreme accuracy makes it ideal for quickly locating target species holding spots, pinpointing predator fish and fishing in extreme depths.
Can you use a fish finder in a river?
How do you tie a fishfinder rig for surf fishing?
Is CHIRP better than sonar?
CHIRP fishfinders transmit a longer pulse than traditional sonar
, putting more energy into the water column, with a true broadband frequency range of up to 117kHz. Instead of pinging a single frequency like traditional 2D sonar, CHIRPing devices transmit a sweeping range of frequencies.
What does down imaging mean?
Down Imaging, as the name suggests, is
the ability on fishfinders to provide detailed picture-like images of the bottom and structures directly below the Boat
. The picture-like images are displayed using specific Down Imaging software that represents the return Sonar signal in a more realistic manner.
What is the easiest fish finder to use?
The world’s easiest fishfinder,
HOOK2 4x Bullet
offers simple menus, easy access to key functions and Autotuning sonar. Powered by proven Lowrance® performance, HOOK2 4x features wide-angle, Broadband sonar coverage. Just plug it in and fish, it’s that easy.
How do you find underwater grass beds?
Does side imaging work in weeds?
Re: side imaging
It does work around weeds
. If there are fish in or around the weeds they will show up on the screen(as bright little orbs) if the transducer is aimed their way. Just get a unit and go out on your lake and pay attention to what you see as you’re fishing.
