Turn the key to the second ignition position (labeled “II”). After 10 to 15 seconds, the maintenance light will flash, and then disappear. Release the buttons and turn the key off. This procedure works on all second-generation Acura TL models (2000 to 2003).
How do you reset the maintenance required light on a 2004 Acura TL?
How do you reset the maintenance required light on a 2002 Acura TL Type S?
What does service due soon B mean?
B.
Replace the engine oil, oil filter, rotate the tires, inspect the front and rear brakes, check the parking brake adjustment, and inspect other items specific to your vehicle
.
Sub Code
.
How do I reset my Acura oil life?
Turn ignition on but do not start the engine. Press the SEL/RESET button on the steering wheel until the remaining engine oil life is shown. Press and hold the SEL/RESET button for at least ten seconds. Use the Up/Down buttons to select RESET, then press the SEL/RESET button to reset engine oil life.
How do you reset the maintenance required light on a 2001 Acura TL?
How do you reset an Acura TL 2006?
How do you reset the oil light on a 2005 Acura TL?
How do you reset the transmission light on a 2000 Acura TL?
How do you reset the maintenance required light on a 2000 Acura Integra?
How do you reset the maintenance light on a 97 Integra?
From years: 1996, 1997, 1998, 1999, 2000, 2001. Turn ignition to (II) do not start the engine. Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
What does B1 mean on Acura TL?
The B in this Maintenance Minder code represents a
mechanical inspection and oil and filter change
. The “1” in B-1 represents that it’s time for the vehicle’s tires to be rotated. B-1 service also targets the brake system for inspection and repairs as needed.
How do I turn off B1 Service Acura?
Press the Select/Reset button and hold it for 10 seconds until the oil life indicator and maintenance code start flashing. Keep holding the button until the oil life indicator resets to 100% and the Honda B1 service light disappears.
What kind of oil does a 2003 Acura TL take?
| CL 2003: 5W-20 (S/UFS) , topped off with 0W-20 (UFS) | TL 2003 3.2Liter: 5W-20 (S/UFS) 2004-2008: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2007-2011 3.5Liter: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2012-2014: 0W-20 (UFS) 2009-2014 3.7Liter: 5W-20 (S/UFS) | TLX 2015-2020: 0W-20 (UFS) |
|---|
How do you reset the service code on a Acura?
Press the UP or DOWN arrow buttons on steering wheel to select RESET, and press SEL/RESET button
. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
What is Acura service code a123?
A –
oil & filter change
. 1 – rotate tires. 2 – in cabin air filter change. 3 – transmission oil change.
How often does an Acura need an oil change?
Improvements in automotive technology and engine oil have upped the recommended intervals for Acura oil changes. While the old advice was to change your oil every 3,000 miles, today’s vehicles can last anywhere from
5,000-10,000 miles
between Acura oil changes.
How do you reset the check engine light on a 2003 Acura MDX?
How do you reset the maintenance required light on a 2004 Acura TSX?
- Turn the ignition switch to the OFF (0) position.
- Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
- Hold the button(s) for 10 seconds or until the indicator resets.
How do you reset the TPMS on a Acura TL?
(Only for Older Acura Cars With Turn-Key Ignitions): Turn the key to the “On” position, but don’t start the car. Then, hold the TPMS light reset button, wait for the tire pressure light to blink three times, and then release it. After you start the car next, wait 20 minutes for the sensor to refresh itself.
