Spoke length is measured
from the inside of the elbow
, as shown in the image below, to the threaded end. When measuring a spoke using a tape measure, a second spoke may be used to hold the elbow of the spoke and the tape measure’s tab, as shown.
How do you measure bike spokes?
What size spokes do I need for 27.5 wheel?
Holes Rim Type Front O/S | 32 XM119 Disc 26′′ 258 | 32 XM319 258 | 32 517 & 717 260 | 32 XM319 650B (27.5′′) 272 |
---|
What size are bicycle spokes?
A majority of mountain bike wheels use either
24, 28, or 32
spokes per wheel depending on their intended use.
Does spoke length have to be exact?
In essence,
you will want to be pretty precise
. 2mm too long might just be ok, 2mm short might be too short. Be sure to measure the ERD yourself (!) and as precise as you are able to.
How are spokes measured on rims?
Are all spokes the same length?
You may need as many as three different spoke lengths
. One length for the front wheel, one for the rear drive side, and one for the rear non-drive side.
What size spoke nipples do I need?
Length: Spoke nipples are usually
12, 14 or 16mm in length
. If using aluminum nipples, the spokes should be long enough to engage the full length of spoke nipple threads so that the load is carried from spoke to the top of the nipple.
How are bladed spokes measured?
Determine the diameter (for round spokes) or dimensions (for bladed spokes) of the spoke.
Measure in the middle of the spoke using a caliper or the spoke diameter gauge included with the TM-1
. Squeeze the TM-1 at the handle grips. Place the spoke between the two fixed posts and the moveable post of the TM-1.
How long are the spokes on a 26 inch bike wheel?
BICYCLE WHEEL SPOKES FOR STANDARD 26′′ WHEEL SCHWINN BIKES AND OTHERS
10 – 5/8′′
THIS IS A COMPLETE SET OF SPOKES FOR 26′′ TIRE SIZE / WHEELS. THEY WILL FIT MANY WHEELS OF MANY BRANDS, YOU GET ALL 36 SPOKES WITH NIPPLES, THEY ARE SIZE 10 – 5/8′′ LONG.
How do you replace a spoke?
How do you measure hub spoke length?
How do you lace 32 spokes?
Can you cut bike spokes?
Condensed answer:
Bike spokes can be shortened
. The first step is to cut them to length. The second is to file the ends and re-thread them.
What is a 14g spoke?
Spoke Gauge Diameter and millimetre size. 15g = 1.8mm. 14g =
2.0mm
.
Are spokes universal?
Spoke lengths are unique to each wheel, rim, and spoke angle (cross 2, cross 3, etc) combination
. Non OEM combinations require special spokes, Buchanan Spokes is a reliable resource.
What is the diameter of a 26 inch wheel?
As with most bike wheel naming conventions, the term ’26 inch’ does not refer to the diameter of the wheel itself, but rather the approximate outside diameter of the tire that fits this wheel size. The actual ISO diameter of a traditional 26′′ wheel is
559 millimeters
.
How many spokes should a bike wheel have?
Number of spokes
Conventional metallic bicycle wheels for single rider bikes commonly have
24, 28, 32 or 36 spokes
, while wheels on tandems have as many as 40 or 48 spokes to support the weight of an additional rider. BMX bikes commonly have 36 or 48 spoke wheels.
How do you buy spokes?
In general terms,
the more spokes a wheel has, the more the load is spread and the stronger the wheel should be
. Conversely, less spokes means a lighter wheel, so a wheelbuilder must strike a balance between desired strength and light weight.